Overview
The Cat® 444 Backhoe Loader provides a C3.6 Stage V engine, optimal operator comfort and control, interactive display screens, an Excavator Style Boom, powerful and efficient hydraulics, Power Management Modes, and Product Link™.
Specifications
| Power - Net | — |
| Operating Weight - Nominal | — |
| Operating Weight - Maximum | — |
Benefits & Features
C3.6 Stage V Engine
The Cat® C3.6 engine meets EU Stage V emission standards while delivering up to a 10% fuel efficiency improvement compared to the previous model. The aftertreatment system is completely maintenance free with Selective Catalytic Reduction (SCR), Diesel Exhaust Fluid (DEF) and a fit for life Diesel Particulate Filter (DPF) system. This new engine delivers power and torque density as per the C4.4 engine installed in the previous model.
Optimal Operator Comfort and Control
EH Seat Mounted Controls are standard on the 444. These give the operator better comfort and more flexibility by allowing the operator to control either hoe, loader or both from any seat position (front, rear or offset).
Interactive Display Screens
The choice of either a soft key or touchscreen display screen gives the operator information at the touch of their fingertips. Many customizable features including hoe response rate and modulation are now offered. Machine Security Software is embedded into the display screen as well as notifications on service intervals.
Specifications
| Power - Net | — |
| Stroke | — |
| Ratings at 2,200 rpm - Gross Power ISO 14396 | 74 kW/101 hp |
| Net Power Rating at 2,200 rpm - SAE J1349 | 68 kW/92 hp |
| Net Torque - SAE J1349 | — |
| Torque Rise (net) | 48% @ 1,500 rpm |
| Emissions | Meets EU Stage V emission standards. |
| Bore | — |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Displacement | — |
| Net Power Rating at 2,200 rpm - ISO 9249 | 68 kW/92 hp |
| Note (2) | No derating required up to 3048 m altitude. Auto derate protects hydraulic and transmission systems. |
| Engine | C3.6 74.5 kW Electronic Turbo Intercooled |
| Ratings at 2,200 rpm - Gross Power SAE J1995 | 76 kW/103 hp |
| Note (3) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Ratings at 2,200 rpm - Gross Power ISO 14396 | 82 kW/111 hp |
| Displacement | — |
| Net Torque - SAE J1349 | — |
| Net Power Rating at 2,200 rpm - SAE J1349 | 76 kW/103 hp |
| Engine | C3.6 82 kW Electronic Turbo Intercooled |
| Torque Rise (net) | 48% @ 1,500 rpm |
| Ratings at 2,200 rpm - Gross Power SAE J1995 | 84 kW/114 hp |
| Stroke | — |
| Note (2) | No derating required up to 3048 m altitude. Auto derate protects hydraulic and transmission systems. |
| Net Power Rating at 2,200 rpm - ISO 9249 | 75 kW/102 hp |
| Bore | — |
| Emissions | Meets EU Stage V emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Forward - 5th | — |
| Reverse - 1st | — |
| Forward - 6th | — |
| Forward - 1st | — |
| Reverse - 2nd | — |
| Forward - 2nd | — |
| Forward - 3rd | — |
| Reverse - 3rd | — |
| Forward - 4th | — |
| Reverse - 1st | — |
| Forward - 6th | — |
| Reverse - 2nd | — |
| Forward - 2nd | — |
| Forward - 4th | — |
| Forward - 1st | — |
| Forward - 5th | — |
| Forward - 3rd | — |
| Reverse - 3rd | — |
| Rear Axle - Static | — |
| Front Axle (AWD) - Dynamic | — |
| Front Axle (AWD) - Static | — |
| Rear Axle - Dynamic | — |
| Operating Weight - Nominal | — |
| Operating Weight - Maximum | — |
| Counterweights - Maximum | — |
| All-Wheel Drive | Standard |
| Ride Control | — |
| 4.9 m Extendible Stick - Excluding Front Counterweight | — |
| 4.3 m Extendible Stick - Excluding Front Counterweight | — |
| Air Conditioning | — |
| Operating Weight - ROPS Capacity - Maximum | — |
| Loader, IT with Quick Coupler | — |
| Operating Weight | — |
| MP Bucket (1.3 m³/1.7 yd³) - without Fold-over Forks | — |
| Minimum Counterweight Recommendations - Standard Stick - Loader Bucket - No QC - MP | — |
| Minimum Counterweight Recommendations - Extendible Stick - Loader Bucket - IT Loader with QC - MP | — |
| MP Bucket (1.3 m³/1.7 yd³) - with Fold-over Forks | — |
| Minimum Counterweight Recommendations - Extendible Stick - Loader Bucket - IT Loader with QC - GP | — |
| Minimum Counterweight Recommendations - Standard Stick - Loader Bucket - IT Loader with QC - MP | — |
| Minimum Counterweight Recommendations - Standard Stick - Loader Bucket - No QC - GP | — |
| Minimum Counterweight Recommendations - Extendible Stick - Loader Bucket - No QC - GP | — |
| Cab - ROPS/FOPS | Standard |
| Note | Machine Configuration – HRC 74.5 kW engine; 4.3 m standard stick hoe; standard cab with A/C; AWD auto-shift transmission; 1.3 m³ MP loader bucket; 600 mm standard duty hoe bucket; 440/80R28 tires; no counterweight; 80 kg operator; full fuel tank. |
| Total Gross Weight Not to Exceed | — |
| Minimum Counterweight Recommendations - Standard Stick - Loader Bucket - IT Loader with QC - GP | — |
| Minimum Counterweight Recommendations - Extendible Stick - Loader Bucket - No QC - MP | — |
| Auto-Shift Transmission | Standard |
| System Pressure - Backhoe | — |
| System Pressure - Loader | — |
| Pump Capacity @ 2,200 rpm | — |
| Type | Closed Center |
| Pump Type | Variable-Flow, Axial Piston |
| AWD Cylinder, One (1) Double Acting - Bore | — |
| AWD Cylinder, One (1) Double Acting - Axle Oscillation | — |
| AWD Cylinder, One (1) Double Acting - Rod Diameter | — |
| AWD Cylinder, One (1) Double Acting - Stroke | — |
| Turning Circle (28" Tires) - 2WD/AWD (inner wheel not braked) - Outside Widest Loader Bucket | — |
| Turning Circle (28" Tires) - 2WD/AWD (inner wheel not braked) - Outside Front Wheels | — |
| Type | Front Wheel |
| Power Steering | Hydrostatic |
| Fuel Tank | — |
| Engine Oil - With Filter | — |
| Rear Axle | — |
| Rear Axle - Planetaries | — |
| Cooling System - A/C | — |
| Hydraulic Tank | — |
| Diesel Exhaust Fluid | — |
| Hydraulic System | — |
| Front Axle - Planetaries | — |
| Front Axle | — |
| Note | Travel speeds of backhoe loader at full throttle, when equipped with 440/80R28 Rear Tires and HRC 74.4 kW Engine. |
Benefits & Features
C3.6 Stage V Engine
The Cat® C3.6 engine meets EU Stage V emission standards while delivering up to a 10% fuel efficiency improvement compared to the previous model. The aftertreatment system is completely maintenance free with Selective Catalytic Reduction (SCR), Diesel Exhaust Fluid (DEF) and a fit for life Diesel Particulate Filter (DPF) system. This new engine delivers power and torque density as per the C4.4 engine installed in the previous model.
Optimal Operator Comfort and Control
EH Seat Mounted Controls are standard on the 444. These give the operator better comfort and more flexibility by allowing the operator to control either hoe, loader or both from any seat position (front, rear or offset).
Interactive Display Screens
The choice of either a soft key or touchscreen display screen gives the operator information at the touch of their fingertips. Many customizable features including hoe response rate and modulation are now offered. Machine Security Software is embedded into the display screen as well as notifications on service intervals.
Excavator Style Boom
The Excavator Style Boom is iconic to the Cat backhoe loader (BHL). This gives the operator more dig depth and reach when working around obstacles meaning less repositioning of the machine is required.
Powerful and Efficient Hydraulics
The load sensing hydraulic system coupled with a variable displacement piston pump deliver powerful hydraulics when the operator really requires it.
Power Management Modes
The operator can choose between Eco Mode, Standard Mode or Standard Plus dependent on job and site conditions. Eco Mode will save the operator fuel, lowering their owning and operating costs, where Standard Plus Mode will give more speed and power when time or tough ground conditions demand this.
Product Link™
Product Link™ comes as standard on the Cat BHL. Many features exist through Product Link including fuel burn and location allowing the owner to access all data to help increase productivity while reducing costs.
Data not available.
Standard Equipment
- Cab ROPS and FOPS
- Cab, Standard
- Tires/Steering/Brakes
- All Wheel Drive
- 100% Differential Lock
- Hydraulic Boosted Brakes
- Tires 24 inch
- Engine/Transmission
- Engine, C3.6 74.5 kW
- Battery, 750 CCA, Standard
- Hinged Radiator Pack
- Auto Idle
- Eco Mode
- Standard Mode
- Standard + Mode
- Transmission Neutralizer
- Transmission, Six Speed Automatic
- Controls
- Controls, Electro Hydraulic Seat Mounted
- Pattern Selector (ISO/SAE)
- Power Steering, Hydrostatic
- Hydraulics
- Variable Displacement Piston Pump
- Side Shift Lock
- Hydraulic Oil Cooler
- Loader Kickout, Float
- Loader Kickout, Return to Dig
- Continuous Flow
- Programmable Auxiliary Flow
- Booms, Sticks and Linkages
- Stick Standard, 4.3 m
- Transport Lock, Swing
- Transport Lock, Boom
- Other Attachments
- External Tool Box
- Transport Tie Downs
- Electrical
- Display Screen, Soft Key
- Reversing Alarm
- Stabilizer Alarm
Optional Equipment
- Cab ROPS and FOPS
- Cab, Deluxe
- Tires/Steering/Brakes
- Tires 28 inch
- Engine/Transmission
- Engine, C3.6 82 kW
- Battery, 750 CCA, Heavy Duty
- Engine Block Heater
- Transmission, Six Speed with Lock-Up Torque Converter
- Hydraulics
- Hydraulic Quick Disconnects
- Hydraulic Lines, One Way
- Hydraulic Lines, Two Way
- Powered Side Shift
- Ride Control
- Booms, Sticks and Linkages
- Stick Extending, 4.3 m
- Stick Extending, 4.9 m
- Hoe Quick Coupler, Mechanical
- Hoe Quick Coupler, Hydraulic
- Loader Quick Coupler, Hydraulic
- Other Attachments
- Counterweight, 115 kg
- Front Fenders
- Street Pads, Stabilizers
- Counterweight, 240 kg
- Counterweight, 460 kg
- Electrical
- Display Screen, Touchscreen
- Product Link Cellular
- Product Link, Dual Mode (cellular and satellite)
- Beacon, Rotating
- Beacon, Strobe
Related Products
Cold Planers
High speed drum and conical bits quickly remove asphalt and concrete prior to resurfacing.
| Model | Working Width | ||
|---|---|---|---|
| PC404 | — | — | Standard Flow |
Grading Buckets
For cleaning ditches, sloping, grading and other finishing work.
| Model | Width | ||
|---|---|---|---|
| 1500 mm (59 in), Pin On | — | — | — |
| 1200 mm (47 in), Pin On | — | — | — |
Heavy Duty Rock Buckets
Designed to work in the harsh rocky conditions found in various regions of the world.
| Model | Width | ||
|---|---|---|---|
| 305 mm (12 in), Pin On | — | — | — |
| 457 mm (18 in), Pin On | — | — | — |
| 610 mm (24 in), Pin On | — | — | — |
| 762 mm (30 in), Pin On | — | — | — |
| 914 mm (36 in), Pin On | — | — | — |
Rippers
For land clearing or site preparation in rock, quarry work and similar high-impact digging applications. Combine with a coupler for Rip & Load productivity.
| Model | Shank Length | ||
|---|---|---|---|
| 639 mm (25 in) | — | — | — |
Standard Duty Buckets
Designed for general light duty excavation in soft soil or clay.
| Model | Width | ||
|---|---|---|---|
| 305 mm (12 in), Pin On | — | — | — |
| 457 mm (18 in), Pin On | — | — | — |
| 610 mm (24 in), Pin On | — | — | — |
| 762 mm (30 in), Pin On | — | — | — |
| 914 mm (36 in), Pin On | — | — | — |