The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.
Maximum Gross Power | — |
Operating Weight | — |
Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) |
INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.
LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.
PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.
Maximum Gross Power | — |
Bore | — |
Stroke | — |
Displacement | — |
Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. |
Maximum Rated Gross Power - ISO 14396 | — |
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | — |
Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | — |
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | — |
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | — |
Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | — |
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | — |
Engine Model | Cat® C7.1 |
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | — |
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | — |
Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | — |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | — |
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | — |
Maximum Rated Gross Power - ISO 14396 (metric) | — |
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
Net Power (Standard Power Mode: Range 1-3*) | — |
Net Power (Performance Power Mode: Range 1-4) | — |
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | — |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) |
Operating Weight | — |
Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. |
Operating Weight (2) | 12 963 kg (28,577 lb)~ |
Operating Weight (1) | 12 891 kg (28,418 lb)** |
Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 LEVEL II |
Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. |
Declared Sound Levels | Declared Sound Levels<br>– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*<br>– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
Diesel Exhaust Fluid (DEF) Tank | — |
Engine Crankcase | — |
Hydraulic Tank | — |
Hydraulic System - Including Tank | — |
Cooling System | — |
Rear Axles | — |
Fuel Tank | — |
Front Axles | — |
Transmission - Gear Box | — |
Steering Cylinder, Double Acting - Stroke | — |
Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
Maximum Working Pressure - Steering Pump | — |
Maximum Flow - Steering Pump | — |
Steering Cylinder, Double Acting - Bore Diameter | — |
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | — |
Steering Cylinder, Double Acting - Rod Diameter | — |
Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | — |
Relief Pressure - Tilt Cylinder | — |
Tilt Cylinder, Double Acting - Stroke | — |
Maximum Flow - Implement Pump | — |
Maximum Working Pressure - Implement Pump | — |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.6/10.5 seconds |
Tilt Cylinder, Double Acting - Bore Diameter | — |
Tilt Cylinder, Double Acting - Rod Diameter | — |
Lift Cylinder, Double Acting - Rod Diameter | — |
Lift Cylinder, Double Acting - Bore Diameter | — |
Maximum Flow - Implement Pump - 4th Function Maximum Flow* | — |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | — |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | — |
Lift Cylinder, Double Acting - Stroke | — |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds |
Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.6/2.6 seconds |
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | — |
Forward and Reverse - Range 2 | — |
Forward and Reverse - Range 3 | — |
Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
Forward and Reverse - Range 4 | — |
Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
Rear Axle - Traction Aid - Optional | Limited slip differential |
Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. |
Front Axle | Fixed |
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 | ± 13.5 degrees |
Note (2) | Offset rims available to meet European roading requirements. |
Front Axle - Traction Aid* | Locking differential (standard) |
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees |
Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
Brakes - Service | Inboard wet disc |
Rear Axle | Oscillating |
Brakes - Parking | Spring applied hydraulically released |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
Full Turn Tip Load (2) | 8148 kg (17,962 lb)~ |
Full Turn Tip Load (1) | 8047 kg (17,740 lb)** |
Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. |
Recyclability | 94% |
INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.
LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.
PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.
With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.
Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.
Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.
Data not available.