The Cat® 140 GC motor grader is easy to own and operate. A demand fan and standard Eco mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent precession using lever controls from the comfort of the all new cab. Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.
Net Power Range (Tier 3) | — |
Operating Weight - Typically Equipped | — |
Weight* | — |
Net Power Range (Tier 3) | — |
Displacement | — |
Bore | — |
Stroke | — |
Engine Model | Cat 7.1 |
Note (1) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Maximum Torque - ISO 9249 | — |
Standard Capability | — |
Note (4) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Derating Altitude | — |
Number of Cylinders | 6 |
Emissions | U.S. EPA Tier 3/EU Stage IIIA |
Note (3) | Power as declared per ISO 14396 |
Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Torque Rise - ISO 9294 | 40% |
Engine RPM | 2,200 |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Throat Clearance | — |
Blade Height | — |
End Bit | — |
Cutting Edge Width | — |
Arc Radius | — |
Weight* | — |
Note | Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment. |
Circle Drive without Slip Clutch | — |
Circle Drive with Slip Clutch | — |
Transmission | — |
Cooling System | — |
Hydraulic System | — |
Fuel Tank | — |
Engine Crankcase | — |
Moldboard Side Shift Left | — |
Maximum Depth of Cut | — |
Moldboard Side Shift Right | — |
Maximum Shoulder Reach Right | — |
Maximum Lift Above Ground | — |
Circle Center Shift Left | — |
Maximum Shoulder Reach Left | — |
Blade Tip Range Backward | 5 |
Circle Center Shift Right | — |
Blade Tip Range Forward | 40 |
Width | — |
Maximum Height | — |
Length of Machine* | — |
Note | *Typically equipped with push block and ripper. |
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Data not available.