The Cat® 120 GC Motor Grader is easy to own and operate. A demand fan and standard Eco mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent precision using lever controls from the comfort of the all new cab.
Net Power - ISO 9249/SAE J1349 | — |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Net Power - ISO 9249/SAE J1349 | — |
Maximum Torque | — |
Engine Model | Cat® C4.4 |
Bore | — |
Displacement | — |
Torque Rise - ISO 9294 | 21% |
Stroke | — |
Derating Altitude | — |
Emissions | Meets India CEV Stage V emission standards |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler, and alternator. Power as declared per ISO 14396. |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Cutting Edge Width | — |
Throat Clearance | — |
Blade Height | — |
End Bit - Width | — |
Arc Radius | — |
Length of Machine* | — |
Width | — |
Maximum Height | — |
Note | *Typically equipped with push block and ripper. |
Blade Tip Range - Backward | 5° |
Circle Centershift - Right | — |
Moldboard Sideshift - Right | — |
Circle Centershift - Left | — |
Moldboard Sideshift - Left | — |
Maximum Depth of Cut | — |
Blade Tip Range - Forward | 40° |
Maximum Lift Above Ground | — |
Circle Drive without Slip Clutch | — |
Fuel Tank | — |
Hydraulic System | — |
Circle Drive with Slip Clutch | — |
Engine Crankcase | — |
Cooling System | — |
Transmission | — |
Data not available.