Overview
The Cat 345 GC is a reliable, low-cost-per-hour excavator. It's up to 25 percent more fuel efficient with up to 30 percent less maintenance cost than its comparative model*. Add in a quiet and comfortable ROPS cab, easy-to-use controls, and several Cat attachment options and you have a fine machine capable of meeting your various job requirements.
*Compared to 349D2 Tier 3
Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.
Specifications
Units:
| Net Power - ISO 9249 | — |
| Operating Weight | — |
| Maximum Digging Depth | — |
Benefits & Features
DO MORE WITH LESS FUEL
- Get up to 25 percent more fuel efficiency than the 349D2 Tier 3 excavator in similar applications.
- The C9.3B engine meets Brazil MAR-1 and China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- Match the excavator to the job with two power modes. Smart mode automatically matches engine and hydraulic power to digging conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
- The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
- Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.
- Advansys bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
- Add auxiliary hydraulics to do more work with various Cat attachments.
- Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on demand through the VisionLink® online interface.
BUILT TO PERFORM
- Work up to 3300 m (10,830 ft) above sea level.
- Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
- Automatic hydraulic oil warm up gets you to work faster in cold temperatures and helps prolong the life of components.
- Advancedfuelfiltration protects the engine from dirty diesel fuel.
- Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
- Standard built-in protection includes a heavy-duty bottom guard, travel motor guard, and swivel protection guard.
- The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.
WORK IN COMFORT
- The Comfort cab has a wide seat that adjusts for operators of all sizes.
- Control the excavator comfortably with easy-to-reach controls all located in front of you.
- Standard automatic climate control keeps you at the right temperature all shift long.
- Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
- Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
- Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.
Specifications
Units:
| Net Power - ISO 9249 | — |
| Engine Model | Cat C9.3 |
| Engine Power - ISO 14396 | — |
| Bore | — |
| Stroke | — |
| Displacement | — |
| Main System - Maximum Flow | 630 l/min (166 gal/min) |
| Maximum Pressure - Equipment | — |
| Maximum Pressure - Travel | — |
| Maximum Pressure - Swing | — |
| Swing Speed | — |
| Maximum Swing Torque | — |
| Operating Weight | — |
| Fuel Tank Capacity | — |
| Cooling System | — |
| Engine Oil | — |
| Swing Drive | — |
| Final Drive - Each | — |
| Hydraulic System - Including Tank | — |
| Hydraulic Tank | — |
| Boom | Reach 6.9m (22.8"") |
| Stick | R2.9TB (9'6"") |
| Bucket | HD 2.41 m³ (3.15 yd³) |
| Shipping Height - Top of Cab | — |
| Handrail Height | — |
| Shipping Length | — |
| Tail Swing Radius | — |
| Counterweight Clearance | — |
| Ground Clearance | — |
| Track Length | — |
| Track Length to Center of Rollers | — |
| Track Gauge | — |
| Transport Width | — |
| Maximum Digging Depth | — |
| Boom | Reach 6.9m (22.8"") |
| Stick | R2.9TB (9'6"") |
| Bucket | HD 2.41 m³ (3.15 yd³) |
| Maximum Reach at Ground Level | — |
| Maximum Cutting Height | — |
| Maximum Loading Height | — |
| Minimum Loading Height | — |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | — |
| Maximum Vertical Wall Digging Depth | — |
| Bucket Digging Force - ISO | — |
| Stick Digging Force - ISO | — |
Benefits & Features
DO MORE WITH LESS FUEL
- Get up to 25 percent more fuel efficiency than the 349D2 Tier 3 excavator in similar applications.
- The C9.3B engine meets Brazil MAR-1 and China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- Match the excavator to the job with two power modes. Smart mode automatically matches engine and hydraulic power to digging conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
- The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
- Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.
- Advansys bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
- Add auxiliary hydraulics to do more work with various Cat attachments.
- Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on demand through the VisionLink® online interface.
BUILT TO PERFORM
- Work up to 3300 m (10,830 ft) above sea level.
- Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
- Automatic hydraulic oil warm up gets you to work faster in cold temperatures and helps prolong the life of components.
- Advancedfuelfiltration protects the engine from dirty diesel fuel.
- Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
- Standard built-in protection includes a heavy-duty bottom guard, travel motor guard, and swivel protection guard.
- The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.
WORK IN COMFORT
- The Comfort cab has a wide seat that adjusts for operators of all sizes.
- Control the excavator comfortably with easy-to-reach controls all located in front of you.
- Standard automatic climate control keeps you at the right temperature all shift long.
- Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
- Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
- Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.
SIMPLE TO OPERATE
- Start the engine with a push button; use a Bluetooth key fob, or Operator ID passcode.
- Program your power mode and joystick preferences using Operator ID; the excavator will remember them every time you go to work.
- Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds — all to prevent wear and tear on the attachment and excavator.
- Navigate quickly on the standard high-resolution 203 mm (8 inch) touchscreen monitor or with the aid of the jog dial control.
- The Cat Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The excavator's onboard Bluetooth reader or Cat App on your phone will locate the device automatically.
- Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
- Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
SAVE ON SERVICE AND MAINTENANCE
- Expect up to 35 percent less maintenance cost than the 349D2 Tier 3 excavator due to extended and synchronized service intervals and smaller fluid quantities (savings calculated over 12,000 machine hours).
- Check hydraulic system oil and easily drain fuel system water from ground level.
- Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
- Using Cat genuine oil and filters and doing your typical S∙O∙S monitoring will double the current service interval to 1,000 hours, giving you greater uptime to do more work.
- Oil and fuel filters are grouped and located on right-hand side of machine for easy maintenance.
- The new air intake filter with pre-cleaner has double the dirt holding capacity of the previous air intake filter.
- The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs.
- S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
BUILT-IN SAFETY FEATURES
- Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
- The standard ROPS cab meets ISO 12117-2:2008 requirements.
- A travel direction indicator helps operators know which way to activate the travel levers.
- A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
- Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
- Serrated steps and anti-skid plate on the service platform help prevent slipping.
- A rearview camera is standard.
Data not available.
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- CAB
- ROPS, standard sound suppression
- High-resolution 203 mm (8") LCD touch screen monitor
- Mechanically adjustable seat
- ENGINE
- Two selectable modes: Power, Smart
- Auto engine speed control
- Up to 3300 m (10,830 ft) altitude capability
- 52° C (126° F) high-ambient cooling capacity
- -18° C (0° F) cold start capability
- Double element air filter with integrated precleaner
- Biodiesel capability up to B20
- HYDRAULIC SYSTEM
- Boom and stick regeneration circuit
- Electronic main control valve
- Auto hydraulic oil warm up
- Reverse swing damping valve
- Auto swing parking brake
- High performance hydraulic return filter
- Two speed travel
- Bio hydraulic oil capability
- Long undercarriage
- UNDERCARRIAGE AND STRUCTURES
- Towing eye on baseframe (ISO 15818 Compliant)
- 9 mt (19, 842 lb) counterweight
- ELECTRICAL SYSTEM
- Maintenance-free 1000 CCA batteries (x2)
- Centralized electrical disconnect switch
- LED chassis light, right and left hand boom lights, cab lights
- CAT TECHNOLOGY
- Cat Product Link
- Auto hammer stop
- SERVICE AND MAINTENANCE
- Grouped location of engine oil & fuel filters
- Scheduled Oil Sampling (S.O.S) sampling ports
- SAFETY AND SECURITY
- Caterpillar One Key security system
- Lockable external tool / storage box
- Lockable door, fuel, and hydraulic tank locks
- Lockable fuel drain compartment
- Service platform with anti-skid plate & recessed bolts
- Right hand handrail & hand hold (ISO 2867 Compliant)
- Signaling / warning horn
- Standard visibility mirror package
- Ground-level secondary engine shutoff switch
- Rearview camera and right-hand-side mirror
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- CAB
- Cat Stick Steer
- ENGINE
- Cold start block heaters
- -32° C (-25° F) cold start capability
- HYDRAULIC SYSTEM
- Fine swing
- Combined two-way auxiliary-circuit
- Combined two-way auxiliary-circuit with hammer return filter
- UNDERCARRIAGE AND STRUCTURES
- 600mm (24") double grouser track shoes
- 600mm (24") HD triple grouser track shoes
- 600mm (24") triple grouser track shoes
- 700mm (28") triple grouser track shoes
- BOOMS AND STICKS
- 6.55 (21'6") Mass boom
- 6.9m (22'8") Reach boom
- 2.55 (8'4") Mass stick
- 2.9m (9'6") Reach stick
- 2.9m (9'6") HD Reach stick
- 3.0m (9'10") Mass stick
- 3.35m (11') Reach stick
- 3.35m (11') HD Reach stick
- SERVICE AND MAINTENANCE
- Electric refueling pump with auto shutoff
Related Products
Units:
Demolition and Sorting Grapples
Cat® Demolition & Sorting Grapples are designed for fast, productive material handling. Capable of high-volume, production loading and precise sorting, they enhance the productivity and efficiency of your operation. The grapples can handle anything from primary and secondary demolition to recycling to get the job done.
| Model | Grapple Area | ||
|---|---|---|---|
| G345 Demolition & Sorting Grapple: 608-0756 | — | — | 35-65 Ton Excavators |
| G318 Demolition & Sorting Grapple: 587-8966 | — | — | 18-25 Ton Excavators |
| G318 WH Demolition & Sorting Grapple: 587-8970 | — | — | 20-25 Ton Excavators |
Equipment Management
Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.
| Model |
|---|
| Cat Product Link |
| VisionLink® |
GC Hammers
Cat ® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.
Heavy Duty
Cat® Heavy Duty Buckets are a great all-purpose bucket, ideal for many different material densities and applications like digging, trenching, loading and your other dirt-handling situations.
| Model | Width | ||
|---|---|---|---|
| Heavy Duty Bucket 1750 mm (69 in): 577-0344 | — | — | — |
Mobile Scrap & Demolition Shears
Cat® Scrap and Demolition Shears are industry leaders in steel processing. Power and performance in a reliable package, backed by the best dealer network in the world.
| Model | Weight - Boom Mount | ||
|---|---|---|---|
| S3050 Rotating Scrap & Demolition Shear | — | — | — |
| S3035 Rotating Scrap & Demolition Shear | — | — | — |
Orange Peel Grapples
Robust design, lifting capacity and efficiency put Caterpillar Orange Peel Grapples on top of the pile in scrap handling and recycling. The grapple's four hydraulic tines penetrate deep into scrap piles and grab tight to move the maximum possible material in every pass. This grapple provides superior productivity and efficiency for material handling operators.
| Model | Capacity | ||
|---|---|---|---|
| GSH555 5-Tine, 1000-Liter Orange Peel Grapple | — | — | Semi-open |
| GSH555 5-Tine, 1500-Liter Orange Peel Grapple | — | — | Semi-open |
| GSH455 4-Tine, 1000-Liter Orange Peel Grapple | — | — | Semi-open |
| GSH455 4-Tine, 1500-Liter Orange Peel Grapple | — | — | Semi-open |
| GSH455 4-Tine, 2000-Liter Orange Peel Grapple | — | — | Semi-open |
Performance Hammers
Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.
Severe Duty
Cat® Severe Duty Buckets are a great all-purpose bucket, ideal for many different material densities and applications like digging, trenching, loading and your other dirt-handling situations.