The 426F2 features a world class operator station with a standard air suspension seat, extra legroom and greater visibility. Ergonomic joystick controls provide smooth operation and low operator effort.
Power - Net | — |
Operating Weight - Nominal | — |
Operating Weight - Maximum | — |
Get the most out of your Cat® Backhoe Loader. Product Link provides quick access to vital information such as machine location, hours worked, machine error codes and fuel burn to help you maximize machine performance.
The introduction of the new cab to the Cat Backhoe Loader provides a comfortable and easy to use operator environment. With the ability to customize your experience, the all new cab allows the operator to perform in greater comfort and enjoy the latest technologies available on today's generation of backhoe loaders.
The F2 Series machines really make an impact. High pump flow in a superior hydraulic system allow the operator excellent hydraulic performance at their fingertips.
Power - Net | — |
Model | Cat 3054C Mechanical Turbo |
Emissions | Engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards. |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | — |
Net Power - 2,200 rpm - ISO 9249 | — |
Net Peak Power - 2,000 rpm - SAE J1349 | — |
Net Peak Power - 2,000 rpm - ISO 9249 | — |
Net Peak Power - 2,000 rpm - EEC 80/1269 | — |
Torque Rise - 1,200 rpm - Net | 38% |
Maximum Torque - 1,400 rpm | — |
Bore | — |
Stroke | — |
Displacement | — |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
Note (2) | No derating required up to 2286 m altitude. Auto derate protects hydraulic and transmission systems. |
Operating Weight - Nominal | — |
Operating Weight - Maximum | — |
Type | Closed Center |
Pump Type | Variable Flow, Axial Piston |
Maximum Pump Capacity | — |
System Pressure - Backhoe | — |
System Pressure - Loader | — |
Inside Cab | — |
Outside Cab | — |
Note | Travel speeds of Two Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
Power Shuttle Transmission - Forward 1st | — |
Power Shuttle Transmission - Forward 2nd | — |
Power Shuttle Transmission - Forward 3rd | — |
Power Shuttle Transmission - Forward 4th | — |
Power Shuttle Transmission - Reverse 1st | — |
Power Shuttle Transmission - Reverse 2nd | — |
Power Shuttle Transmission - Reverse 3rd | — |
Power Shuttle Transmission - Reverse 4th | — |
Cooling System | — |
Fuel Tank | — |
Engine Oil - With Filter | — |
Transmission - Power Shuttle - AWD | — |
Rear Axle | — |
Rear Axle - Planetaries | — |
Front Axle (AWD) | — |
Front Axle (AWD) - Planetaries | — |
Hydraulic System | — |
Hydraulic Tank | — |
Operating Weight - Estimated | — |
Operating Weight - ROPS Capacity - Maximum | — |
Counterweights - Base | — |
Counterweights - Medium | — |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - GP | — |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - MP | — |
Note | *Machine Configuration – standard engine, standard stick hoe, standard cab with A/C, AWD standard shift transmission, 0.96 m³ MP loader bucket, 610 mm standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, no counterweight, 80 kg operator and full fuel tank. |
Features (1) | Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives. |
Features (2) | AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance. |
Features (3) | AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability. |
Front Axle (AWD) - Static | — |
Front Axle (AWD) - Dynamic | — |
Rear Axle - Static | — |
Rear Axle - Dynamic | — |
Type | Front Wheel |
Power Steering | Hydrostatic |
AWD Cylinder, One (1) Double Acting - Bore | — |
AWD Cylinder, One (1) Double Acting - Stroke | — |
AWD Cylinder, One (1) Double Acting - Rod Diameter | — |
Turning Circle (inner wheel not braked) - Outside Front Wheels | — |
Turning Circle (inner wheel not braked) - Outside Widest Loader Bucket | — |
Type | Fully enclosed boosted, hydraulic, multiple discs. |
Features (1) | Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft. |
Features (2) | Completely enclosed and sealed. |
Features (3) | Self-adjusting. |
Features (4) | Dual foot-operated boosted brake pedals can be interlocked for roading. |
Features (5) | Parking/secondary brakes are independent of the service brake system. Parking brake is mechanically applied through a hand lever located in the right side console. |
Features (6) | Meets ISO 3450:1996 requirements. |
Overall Length - In Roading Position | — |
Overall Transportation Length | — |
Overall Transportation Height - 4.3 m | — |
Overall Width - Excluding Loader Bucket | — |
Height - Top of Cab/Canopy | — |
Height - Top of Exhaust Stack | — |
Rear Axle - Centerline to Front Grill | — |
Wheelbase - AWD | — |
Note | Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified. |
Overall Length - In Roading Position | — |
Overall Transportation Length | — |
Overall Transportation Height - 4.3 m | — |
Overall Width - Excluding Loader Bucket | — |
Height - Top of Cab/Canopy | — |
Height - Top of Exhaust Stack | — |
Rear Axle - Centerline to Front Grill | — |
Wheelbase - AWD | — |
Note | Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified. |
Capacity | — |
Width | — |
Lift Capacity at Maximum Height | — |
Lift Breakout Force | — |
Tilt Breakout Force | — |
Tipping Load - Breakout Point | — |
Maximum Hinge Pin Height | — |
Dump Angle at Full Height | 46° |
Dump Height at Maximum Angle | — |
Dump Reach at Maximum Angle | — |
Maximum Bucket Rollback at Ground Level | 38° |
Digging Depth | — |
Maximum Grading Angle | 113° |
Grill to Bucket Cutting Edge, Carry Position | — |
Maximum Operating Height | — |
Bucket Weight - Excluding Teeth and Forks | — |
Capacity | — |
Width | — |
Lift Capacity at Maximum Height | — |
Lift Breakout Force | — |
Tilt Breakout Force | — |
Tipping Load - Breakout Point | — |
Maximum Hinge Pin Height | — |
Dump Angle at Full Height | 46° |
Dump Height at Maximum Angle | — |
Dump Reach at Maximum Angle | — |
Maximum Bucket Rollback at Ground Level | 39° |
Digging Depth | — |
Maximum Grading Angle | 116° |
Grill to Bucket Cutting Edge, Carry Position | — |
Maximum Operating Height | — |
Bucket Weight - Excluding Teeth and Forks | — |
Digging Depth - SAE Maximum | — |
Digging Depth, Manufacturer's Maximum | — |
Digging Depth - 2440 mm Flat Bottom | — |
Digging Depth - 600 mm Flat Bottom | — |
Digging Depth, 600 mm Flat Bottom, Manufacturer's | — |
Reach from Swing Pivot at Ground Line | — |
Maximum Operating Height | — |
Loading Height | — |
Loading Reach | — |
Swing Arc | 180° |
Bucket Rotation | 205° |
Stabilizer Overall Width | — |
Bucket Dig Force | — |
Stick Dig Force | — |
Get the most out of your Cat® Backhoe Loader. Product Link provides quick access to vital information such as machine location, hours worked, machine error codes and fuel burn to help you maximize machine performance.
The introduction of the new cab to the Cat Backhoe Loader provides a comfortable and easy to use operator environment. With the ability to customize your experience, the all new cab allows the operator to perform in greater comfort and enjoy the latest technologies available on today's generation of backhoe loaders.
The F2 Series machines really make an impact. High pump flow in a superior hydraulic system allow the operator excellent hydraulic performance at their fingertips.
The 426F2 is equipped with our tried and tested Cat 3054C engine and is finely tuned to a Cat four speed manual transmission. This fine tuning enables the 426F2 to reach a 40 km/h roading speed.
Data not available.