The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Engine Model | Cat C3.6 |
Power - Net | — |
Operating Weight | — |
Engine Model | Cat C3.6 |
Power - Net | — |
Displacement | — |
Net Power - 2,200 rpm - SAE J1349 | — |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | — |
Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) | Engine equivalent to Tier 3 emission standards. |
Power Train | Hydrostatic |
Operating Weight | — |
Operating Weight - LGP | — |
Operating Weight - LGP, 762 mm/30 in | — |
Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
FOPS | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Drive Pumps | 1 |
Maximum Travel Speed - Reverse | — |
Relief Valve Settings | — |
Maximum Travel Speed - Forward | — |
Track Motors | 2 |
Track Gauge | — |
Length - Track on Ground - LGP, 762 mm (30 in) | — |
Shoe Width - Standard | — |
Ground Pressure - LGP, 762 mm (30 in) | — |
Track Gauge - LGP, 762 mm (30 in) | — |
Length - Track on Ground - LGP | — |
Number of Rollers - Each Side | 6 |
Shoe Width - LGP, 762 mm (30 in) | — |
Track Gauge - LGP | — |
Ground Pressure - LGP | — |
Shoe Width - LGP | — |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
Length of Track on Ground | — |
Ground Pressure | — |
Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
Crankcase - With Filter | — |
Fuel Tank | — |
Cooling System | — |
Final Drive - Each - LGP | — |
Transmission - Hydraulic Tank | — |
Final Drives - Each Side | — |
Pump Output | — |
Relief Valve Settings | — |
Type | Parallelogram |
Number of Shanks | 3 |
Height | — |
Weight | — |
Overall Width | — |
Maximum Reach - Ground Line | — |
Maximum Ground Clearance Under Tip | — |
Maximum Digging Depth | — |
Weight | — |
Winch Drive | Hydrostatic |
Control | Hydraulic |
Speed | Variable |
Throat Clearance | — |
Overall Width | — |
Drum Capacity - Recommended Cable | — |
Maximum Line Pull - Full Drum | — |
Drum Capacity - Optional Cable | — |
Rope Diameter - Recommended | — |
Winch Length | — |
Maximum Line Pull - Bare Drum | — |
Maximum Line Speed - Bare Drum | — |
Drum Width | — |
Drum Diameter | — |
Maximum Line Speed - Full Drum | — |
Rope Diameter - Optional | — |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Track Gauge - LGP | — |
Overall Length - With Blade - LGP | — |
BLADE: Blade Width - LGP | — |
BLADE: Blade Capacity (SAE) - LGP | — |
BLADE: Blade Width at Maximum Angle - LGP | — |
Ground Clearance - LGP, 762 mm (30 in) | — |
BLADE: Digging Depth - LGP | — |
Track Gauge - LGP, 762 mm (30 in) | — |
Overall Length - With Blade - LGP, 762 mm (30 in) | — |
BLADE: Maximum Angle (either side) - LGP | 25° |
BLADE: Maximum Tilt - LGP | — |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Blade Height - LGP | — |
Ground Clearance - LGP | — |
BLADE: Blade Lift Height - LGP | — |
Note | *Abrasion Undercarriage |
Dozer Height - LGP, 762 mm (30 in) | — |
Width of Dozer (standard shoes, no blade) - LGP | — |
Dozer Height - Standard | — |
Dozer Height - LGP | — |
Width of Dozer (standard shoes, no blade) - Standard | — |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | — |
Overall Length - With Blade - Standard | — |
BLADE: Maximum Tilt - Standard | — |
BLADE: Blade Capacity (SAE) - Standard | — |
BLADE: Blade Width - Standard | — |
Track Gauge - Standard | — |
Ground Clearance - Standard | — |
BLADE: Blade Width at Maximum Angle - Standard | — |
BLADE: Digging Depth - Standard | — |
BLADE: Blade Height - Standard | — |
BLADE: Blade Lift Height - Standard | — |
BLADE: Maximum Angle (either side) - Standard | 25° |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
Data not available.