The new Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Engine Model | Cat® C3.6 |
Power - Net | — |
Operating Weight | — |
Engine Model | Cat® C3.6 |
Power - Net | — |
Displacement | — |
Net Power - 2,200 rpm - SAE J1349 | — |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | — |
Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) | Engine equivalent to Tier 3 emission standards. |
Power Train | Hydrostatic |
Operating Weight | — |
Operating Weight - LGP | — |
Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level II |
Drive Pumps | 1 |
Maximum Travel Speed - Reverse | — |
Relief Valve Settings | — |
Maximum Travel Speed - Forward | — |
Track Motors | 2 |
Number of Rollers - Each Side | 7 |
Shoe Width - LGP | — |
Shoe Width - Standard | — |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
Track Gauge - LGP | — |
Track Gauge | — |
Ground Pressure - LGP | — |
Length - Track on Ground - LGP | — |
Ground Pressure | — |
Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
Length of Track on Ground | — |
Final Drive - Each - LGP | — |
Transmission - Hydraulic Tank | — |
Crankcase - With Filter | — |
Cooling System | — |
Fuel Tank | — |
Final Drives - Each Side | — |
Pump Output | — |
Relief Valve Settings | — |
Type | Parallelogram |
Number of Shanks | 3 |
Height | — |
Weight | — |
Maximum Reach - Ground Line | — |
Maximum Ground Clearance Under Tip | — |
Overall Width | — |
Maximum Digging Depth | — |
Weight | — |
Winch Drive | Hydrostatic |
Control | Hydraulic |
Speed | Variable |
Maximum Line Pull - Full Drum | — |
Drum Width | — |
Maximum Line Speed - Full Drum | — |
Rope Diameter - Recommended | — |
Drum Capacity - Recommended Cable | — |
Overall Width | — |
Winch Length | — |
Rope Diameter - Optional | — |
Drum Diameter | — |
Maximum Line Speed - Bare Drum | — |
Drum Capacity - Optional Cable | — |
Throat Clearance | — |
Maximum Line Pull - Bare Drum | — |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
BLADE: Blade Capacity (SAE) - LGP | — |
Track Gauge - LGP | — |
Overall Length - With Blade - LGP | — |
BLADE: Blade Width at Maximum Angle - LGP | — |
BLADE: Blade Height - LGP | — |
BLADE: Maximum Tilt - LGP | — |
BLADE: Blade Lift Height - LGP | — |
BLADE: Blade Width - LGP | — |
BLADE: Maximum Angle (either side) - LGP | 25° |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Digging Depth - LGP | — |
Ground Clearance - LGP | — |
Note | Abrasion Undercarriage |
Length of Basic Dozer (without blade) - Standard | — |
Width of Dozer (standard shoes, no blade) - Standard | — |
Width of Dozer (standard shoes, no blade) - LGP | — |
Length of Basic Dozer (without blade) - LGP | — |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
Ground Clearance - Standard | — |
BLADE: Maximum Angle (either side) - Standard | 25° |
BLADE: Blade Height - Standard | — |
BLADE: Maximum Tilt - Standard | — |
Overall Length - With Blade - Standard | — |
BLADE: Digging Depth - Standard | — |
BLADE: Blade Width - Standard | — |
BLADE: Blade Lift Height - Standard | — |
BLADE: Blade Width at Maximum Angle - Standard | — |
BLADE: Blade Capacity (SAE) - Standard | — |
Track Gauge - Standard | — |
Data not available.