The 980L Wheel Loader is equipped with built-in proven technologies to meet your expectations for reliability, productivity, fuel efficiency, and a long service life. This machine provides you increased power, incorporates a new shifting strategy and a lockup clutch torque converter that delivers smoother shifts, faster acceleration and increased travel speed when climbing a grade. This machine delivers the reliability, durability, and versatility you’ve come to expect from a Cat machine. |
Net Power - ISO 9249 | — |
Operating Weight | — |
Bucket Capacities | 4.2-12.2 m³ (5.5-16.0 yd³) |
Net Power - ISO 9249 | — |
Engine Model | Cat C13 |
Displacement | — |
Maximum Power - 1,800 rpm - ISO 14396 - Metric | — |
Maximum Net Power - 1,800 rpm - ISO 9249 - Metric | — |
Peak Gross Torque - 1,300 rpm - ISO 14396 | — |
Maximum Net Torque - 1,000 rpm | — |
Operating Weight | — |
Note | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m? general purpose bucket with BOCE. |
Bucket Capacities | 4.2-12.2 m³ (5.5-16.0 yd³) |
Cooling System | — |
Crankcase | — |
Transmission | — |
Hydraulic Tank | — |
Differential - Final Drives - Front | — |
Differential - Final Drives - Rear | — |
Fuel Tank | — |
Note (1) | *Distance of 15 m, moving forward in second gear ratio. |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | — |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | — |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 109 LWA*** |
Note (2) | **For machines in countries that adopt the EU Directives. |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | — |
Note (3) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 78 dB(A)* |
Forward - 1 | — |
Forward - 2 | — |
Forward - 3 | — |
Forward - 4 | — |
Reverse - 1 | — |
Reverse - 2 | — |
Reverse - 3 | — |
Reverse - 4 | — |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm roll radius. |
Breakout Force | — |
Static Tipping Load - Full 37° Turn - With Tire Deflection | — |
Static Tipping Load - Full 37° Turn - No Tire Deflection | — |
Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Note (1) | For a machine configuration as defined under "Weight." |
Implement System - Maximum Operating Pressure | — |
Implement System - Maximum Pump Output at 2,250 rpm | — |
Implement Pump Type | Variable Displacement Piston |
Hydraulic Cycle Time - Total | — |
Height - Top of Exhaust Pipe | — |
Rack Back - Maximum Lift | 61 degrees |
Rack Back - Carry Height | 48 degrees |
Ground Clearance | — |
Height - Top of ROPS | — |
Maximum Width over Tires | — |
Centerline of Rear Axle to Hitch | — |
Centerline of Rear Axle to Edge of Counterweight | — |
Rack Back at Ground | 40 degrees |
Overall Length - Without Bucket | — |
Wheel Base | — |
Hinge Pin Height at Maximum Lift | — |
Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
Tread Width | — |
Height - Top of Hood | — |
Lift Arm Clearance at Maximum Lift | — |
Hinge Pin Height at Carry | — |
Overall Length - Without Bucket | — |
Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
Height - Top of Exhaust Pipe | — |
Maximum Width over Tires | — |
Hinge Pin Height at Carry | — |
Height - Top of Hood | — |
Rack Back - Maximum Lift | 61 degrees |
Rack Back at Ground | 39 degrees |
Height - Top of ROPS | — |
Wheel Base | — |
Hinge Pin Height at Maximum Lift | — |
Centerline of Rear Axle to Hitch | — |
Rack Back - Carry Height | 48 degrees |
Ground Clearance | — |
Centerline of Rear Axle to Edge of Counterweight | — |
Tread Width | — |
Lift Arm Clearance at Maximum Lift | — |
Bucket Range | 4.2-12.2 m³ (5.5-16.0 yd³) |
Data not available.