Experience the best finish grading tractors in the industry. The Cat® D3K2, D4K2 and D5K2 Track-Type Tractors deliver superior performance and comfort with lower operating costs.
Engine Model | Cat C4.4 |
Power - Net | — |
Operating Weight - XL | — |
Improvements were made in various areas of blade control, using new technology features. Options such as Slope Indicate, Slope Assist and Stable Blade, offers the operator simple, intuitive control of the blade especially during finish grading and contributes to increased productivity and less operator fatigue.
The family of Small Dozers offers a choice of both track frames and undercarriages.
Track frames are available in two configurations:
XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required
Undercarriages are available in two configurations:
• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn
• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components
The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
Quiet environment
Wide door openings for easy entry/exit
Dash mounted air vents for improved air circulation
Air suspension seat for a more comfortable ride
Air conditioning for greater comfort in all climates
New ventilated seat (optional)
Heated seat and heated control handles (optional)
Engine Model | Cat C4.4 |
Power - Net | — |
Displacement | — |
Bore | — |
Stroke | — |
Note | Engine equivalent to Tier 3 emissions levels. |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | — |
Net Power - 2,200 rpm - SAE J1349 | — |
Drive Pumps | 1 |
Relief Valve Settings | — |
Maximum Travel Speed - Reverse | — |
Maximum Travel Speed - Forward | — |
Track Motors | 2 |
Operating Weight - XL | — |
Operating Weight - LGP | — |
Note | Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Final Drive - Each - XL | — |
Fuel Tank | — |
Crankcase - With Filter | — |
Final Drive - Each - LGP | — |
Transmission - Hydraulic Tank | — |
Cooling System | — |
Pump Output | — |
Relief Valve Settings | — |
Length - Track on Ground - XL | — |
Ground Pressure - XL | — |
Ground Contact Area - LGP | — |
Track Gauge - LGP | — |
Shoe Width - LGP | — |
Ground Pressure - LGP | — |
Track Gauge - XL | — |
Ground Contact Area - XL | — |
Shoe Width - XL | — |
Length - Track on Ground - LGP | — |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
Number of Rollers - Each Side | 7 |
Number of Shoes - Each Side - SystemOne Undercarriage | 38 |
Type | Parallelogram |
Number of Shanks | 3 |
Height | — |
Weight | — |
Maximum Ground Clearance Under Tip | — |
Maximum Reach - Ground Line | — |
Overall Width | — |
Maximum Digging Depth | — |
Weight | — |
Winch Drive | Hydrostatic |
Control | Hydraulic |
Speed | Variable |
Rope Diameter - Optional | — |
Drum Capacity - Recommended Cable | — |
Drum Width | — |
Drum Capacity - Optional Cable | — |
Winch Length | — |
Maximum Line Pull - Full Drum | — |
Throat Clearance | — |
Maximum Line Pull - Bare Drum | — |
Rope Diameter - Recommended | — |
Maximum Line Speed - Bare Drum | — |
Overall Width | — |
Maximum Line Speed - Full Drum | — |
Drum Diameter | — |
Sound Levels - ISO 6396:2008 | — |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level II |
Sound Levels - SAE J1166 FEB2008 | — |
BLADE: Blade Lift Height - Intermediate | — |
Overall Length - With Blade - XL | — |
Tractor Height - LGP | — |
BLADE: Blade Width - XL | — |
BLADE: Blade Height - Intermediate | — |
BLADE: Blade Height - XL | — |
BLADE: Blade Capacity (SAE) - XL | — |
BLADE: Blade Lift Height - XL | — |
Track Gauge - LGP | — |
Length - Basic Tractor - Without Blade - LGP | — |
Track Gauge - XL | — |
Width - Tractor - Standard Shoes - No Blade - XL | — |
BLADE: Blade Width at Maximum Angle - LGP | — |
Length - Basic Tractor - Without Blade - XL | — |
BLADE: Digging Depth - XL | — |
BLADE: Blade Capacity (SAE) - LGP | — |
BLADE: Blade Capacity (SAE) - Intermediate | — |
BLADE: Blade Height - LGP | — |
BLADE: Blade Width at Maximum Angle - Intermediate | — |
BLADE: Maximum Tilt - XL | — |
Overall Length - With Blade - LGP | — |
BLADE: Digging Depth - LGP | — |
Ground Clearance - LGP | — |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Digging Depth - Intermediate | — |
Width - Tractor - Standard Shoes - No Blade - LGP | — |
BLADE: Blade Cutting Edge Angle, Adjustable - XL | 52° to 58° |
BLADE: Maximum Tilt - Intermediate | — |
BLADE: Maximum Tilt - LGP | — |
BLADE: Blade Width - Intermediate | — |
BLADE: Maximum Angle (either side) - Intermediate | 25° |
Ground Clearance - XL | — |
BLADE: Blade Width - LGP | — |
Tractor Height - XL | — |
BLADE: Maximum Angle (either side) - LGP | 25° |
BLADE: Blade Lift Height - LGP | — |
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
BLADE: Blade Width at Maximum Angle - XL | — |
BLADE: Maximum Angle (either side) - XL | 25° |
Improvements were made in various areas of blade control, using new technology features. Options such as Slope Indicate, Slope Assist and Stable Blade, offers the operator simple, intuitive control of the blade especially during finish grading and contributes to increased productivity and less operator fatigue.
The family of Small Dozers offers a choice of both track frames and undercarriages.
Track frames are available in two configurations:
XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required
Undercarriages are available in two configurations:
• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn
• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components
The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
Quiet environment
Wide door openings for easy entry/exit
Dash mounted air vents for improved air circulation
Air suspension seat for a more comfortable ride
Air conditioning for greater comfort in all climates
New ventilated seat (optional)
Heated seat and heated control handles (optional)
Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
Easy ground level access to hydraulic filters located in the left rear service compartment
Data not available.