Overview
A quiet cab, efficient power systems and smart technologies mean happier operators and more profit from every task you throw at the Cat® M320D2 Wheeled Excavator. Built to take on the toughest conditions, the M320D2 offers optional configurations and attachments to handle most any job site need.
Specifications
Units:
| Engine Model | Cat C7.1 |
| Net Power | — |
| Maximum Travel Speed | — |
Benefits & Features
PERFORMANCE AND PRODUCTIVITY
- Cat C7.1 engine meets EU Stage IIIA equivalent emission standards.
- Engine fuel system designed to manage world-wide fuel quality and provide outstanding low fuel consumption during both working and traveling applications.
- One-Touch Low Idle Control and Automatic Engine Speed Control reduces engine speed if no operation is performed, reducing fuel consumption and sound levels.
- Three working modes: Power mode, Eco Mode and Travel mode.
- Constant Power Strategy, providing a quick response to changing loads, while delivering the same amount of power.
- Choice of various booms and sticks provides the right balance of reach and digging forces for all applications.
- Dedicated Swing Pump allows faster and smoother combined movements when using the implements while swinging.
EXPAND YOUR CAPABILITIES
- Multiple configurations meet all your applications needs, with a choice of booms, sticks, blade and/or stabilizer undercarriages.
- Highly mobile, the M320D2 can travel up to 37 km/h.
- Standard one-way high pressure hydraulics allow customers to install attachments like hammers without adding other lines.
- Ten hydraulic pump flow and pressure settings can be preset within the monitor allowing quicker and easier attachment (optional).
- A lifting eye into the bucket linkage, the heavy lift mode and the overload warning signal allow operators to safely lift heavy loads.
- Wide range of Cat attachments to handle any job at hand.
OPERATOR COMFORT AND SAFETY
- ROPS cab structure and Operator Protective Structure (top and front guards) are available.
- Ergonomically designed cab with controls kept to a minimum, conveniently located and easy to operate.
- The optional air-suspension seat, with automatic weight adjustment and heated cushions enhance comfort and productivity.
- Safety is enhanced by the all-round visibility provided by large glass areas and skylight and the standard rear-mounted camera image displayed on the full color monitor.
- Low sound levels, as a result of the variable fan speed and remote cooling system enabling.
Specifications
Units:
| Engine Model | Cat C7.1 |
| Net Power | — |
| Bore | — |
| Stroke | — |
| Displacement | — |
| Maximum Torque - 1,400 rpm | — |
| Net Power - Maximum - ISO 14396 at 2,000 rpm (Gross) | — |
| Net Power - Maximum - ISO 9249 at 1,800 rpm | — |
| Engine Gross Power (Maximum) - ISO 14396 | — |
| Ratings | — |
| Number of Cylinders | 6 |
| Emission Standards | U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards and China III Nonroad emission standards |
| Net Power - Rated - ISO 9249/SAE J1349 | — |
| Net Power - Maximum - 80/1269/EEC | — |
| Engine Gross Power (Maximum) - ISO 14396 - Metric | — |
| Net Power (Rated) - ISO 9249/SAE J1349 - Metric | — |
| Net Power (Maximum) - ISO 9249/SAE J1349 (metric) | — |
| Net Power - Rated - 80/1269/EEC | — |
| Net Power - Maximum - ISO 9249/SAE J1349 | — |
| Operating Weight | 19 000 to 19 800 kg (41,888 to 43,652 lb) |
| Weight - Counterweight - Standard | — |
| Weight - VA Boom - Front Dozer, Rear Outriggers | — |
| Weight - Sticks - Long (2800 mm) | — |
| Weight - One-Piece Boom - Front Dozer, Rear Outriggers | — |
| Weight - Sticks - Medium (2500 mm) | — |
| Swing Speed | — |
| Swing Torque | — |
| Maximum Flow - Swing Mechanism | — |
| Maximum Pressure - Auxiliary Circuit - Swing Mechanism | — |
| Maximum Pressure - Auxiliary Circuit - Medium Pressure | — |
| Maximum Flow - Implement/Travel Circuit | — |
| Maximum Pressure - Auxiliary Circuit - High Pressure | — |
| Maximum Pressure - Implement Circuit - Travel Circuit | — |
| Tank Capacity | — |
| System | — |
| Maximum Flow - Auxiliary Circuit - Medium Pressure | — |
| Maximum Pressure - Implement Circuit - Normal | — |
| Maximum Pressure - Implement Circuit - Heavy Lift | — |
| Maximum Flow - Auxiliary Circuit - High Pressure | — |
| Drawbar Pull | — |
| Maximum Gradeability | 60% |
| Creeper Speed - 1st Gear | — |
| Creeper Speed - 2nd Gear | — |
| Forward/Reverse - 1st Gear | — |
| Forward/Reverse - 2nd Gear | — |
| Engine Crankcase | — |
| Final Drive | — |
| Powershift Transmission | — |
| Rear Axle - Housing (Differential) | — |
| Cooling System | — |
| Front Steering Axle - Differential | — |
| Fuel Tank - Total Capacity | — |
| Standard | 10.00-20 (Dual Pneumatic) |
| Ground Clearance | — |
| Maximum Steering Angle | 35° |
| Minimum Turning Radius - Standard Axle - End of One-Piece Boom | — |
| Oscillation Axle Angle | ±8.5° |
| Minimum Turning Radius - Standard Axle - End of VA Boom | — |
| Minimum Turning Radius - Standard Axle - Outside of Tire | — |
| Bucket Capacities | 0.35 to 1.18 m3 (0.46 to 1.54 yd3) |
| Maximum Digging Depth | — |
| Maximum Reach - Ground Level | — |
| Maximum Travel Speed | — |
| Width | — |
| Blade Roll - Over Height | — |
| Blade Type | Parallel |
| Operator Sound - 2000/14/EC | — |
| Spectator Sound - 2000/14/EC | — |
| Cab - FOPS | Cab with FOPS (Falling Object Protective Structure) meets FOPS criteria ISO 10262:1998 and SAE J1356:2008 |
| Cab/Sound Levels | Meets appropriate standards as listed in “Sound Performance” |
| Note | *Not available in all markets. Available only for Africa, Middle East and Eurasia. Please contact your Cat dealer for details. |
| Cab/ROPS* | ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ROPS criteria ISO 12117-2:2008 |
| Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6 | less than 0.7 m/s2 |
| Fluids (Optional) - Biodiesel Up to B20 | Meets EN14214 or ASTM D6751 with EN590 or ASTM D975 Standard Mineral diesel fuels |
| Engine Emissions | Meets China III Nonroad; Meets Tier 3/Stage IIIA equivalent |
| Vibration Levels - Maximum Whole Body - ISO/TR 25398:2006 | less than 0.5 m/s2 |
| Vibration Levels - Maximum Hand/Arm - ISO 5349:2001 | less than 2.5 m/s2 |
Benefits & Features
PERFORMANCE AND PRODUCTIVITY
- Cat C7.1 engine meets EU Stage IIIA equivalent emission standards.
- Engine fuel system designed to manage world-wide fuel quality and provide outstanding low fuel consumption during both working and traveling applications.
- One-Touch Low Idle Control and Automatic Engine Speed Control reduces engine speed if no operation is performed, reducing fuel consumption and sound levels.
- Three working modes: Power mode, Eco Mode and Travel mode.
- Constant Power Strategy, providing a quick response to changing loads, while delivering the same amount of power.
- Choice of various booms and sticks provides the right balance of reach and digging forces for all applications.
- Dedicated Swing Pump allows faster and smoother combined movements when using the implements while swinging.
EXPAND YOUR CAPABILITIES
- Multiple configurations meet all your applications needs, with a choice of booms, sticks, blade and/or stabilizer undercarriages.
- Highly mobile, the M320D2 can travel up to 37 km/h.
- Standard one-way high pressure hydraulics allow customers to install attachments like hammers without adding other lines.
- Ten hydraulic pump flow and pressure settings can be preset within the monitor allowing quicker and easier attachment (optional).
- A lifting eye into the bucket linkage, the heavy lift mode and the overload warning signal allow operators to safely lift heavy loads.
- Wide range of Cat attachments to handle any job at hand.
OPERATOR COMFORT AND SAFETY
- ROPS cab structure and Operator Protective Structure (top and front guards) are available.
- Ergonomically designed cab with controls kept to a minimum, conveniently located and easy to operate.
- The optional air-suspension seat, with automatic weight adjustment and heated cushions enhance comfort and productivity.
- Safety is enhanced by the all-round visibility provided by large glass areas and skylight and the standard rear-mounted camera image displayed on the full color monitor.
- Low sound levels, as a result of the variable fan speed and remote cooling system enabling.
LOWER MAINTENANCE COSTS
- 500 hours fuel filter replacement (reduced to 250 hours if fuel quality is sub-standard) allows reduced maintenance cost.
- All daily maintenance points are accessible from ground level.
- Clean design, with colored and numbered electrical wires, protected by thick braiding for ease of service.
- Greasing points are centralized and kept to a minimum.
- Cat XT™-6 ES hoses are resistant and durable, which reduce the risk of leaks that can reduce the performance of the machine.
- Rigidity and long life with effective transmission protection and heavy duty axle.
- Standard heavy duty batteries for improved cold start capability.
INTEGRATED CAT TECHNOLOGIES
- Cat technology solutions increase production and minimize operating costs. Link technologies wirelessly connect you to your job site, providing machine location, hours, fuel usage, idle time
and event codes.
Data not available.
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- ELECTRICAL
- Alternator, 75 ampere
- Lights: – Halogen working lights<ul><li>Cab mounted: two front, one rear</li><li>Boom</li></ul>– Roading lights<ul><li>Halogen front lights</li><li>LED rear lights</li></ul>– Halogen interior light
- Main shut-off switch
- Two Cat maintenance free heavy-duty batteries
- Signal/warning horn
- ENGINE
- Cat C7.1 meets China III Nonroad emission standards and meets Tier 3/Stage IIIA equivalent emission standards
- Automatic engine speed control, including one touch low idle
- Automatic starting aid
- Power mode selector (Eco and standard)
- Altitude capability: 3000 m
- Fuel/water separator with level indicator, fuel priming pump, water level switch and a visual restriction indicator
- HYDRAULICS
- Cat XT-6 ES hoses
- Adjustable hydraulic sensitivity
- Oil cooler
- Anti-drift valve for bucket cylinder
- Hydraulic mineral oil, Cat HYDO™ Advanced 10 oil
- Heavy lift mode
- Load-sensing hydraulic system
- Separate swing pump
- Stick regeneration circuit
- OPERATOR STATION
- Reinforced cab structure compliant with 2006/42/EC (tested according to ISO 12117-2:2008) (Not available in all markets. Available only for Africa, Middle East and Eurasia. Please contact your Cat dealer for details.)
- Washer bottle for wipers
- Interior lighting
- Joysticks, pilot operated
- Literature compartment behind the seat
- Mounting provisions for radio and speakers
- Adjustable armrests
- Air conditioner, heater and defroster with automatic climate control
- Ash tray with cigarette lighter (24 volt)
- Beverage cup/can holder
- Bolt-on guards capability
- Bottle holder
- Bottom mounted, intermittent, parallel wiping system that covers the upper and lower windshield glass
- Camera mounted on counterweight displays through cab monitor
- Coat hook
- Floor mat, washable, with storage compartment
- Instrument panel and gauges, with full color monitor display: – Information and warning messages in local language – Gauges for fuel level, engine coolant and hydraulic oil temperature – Filters/fluids change interval – Indicators for headlights, turning signal, low fuel, engine dial setting – Clock with 10-day backup battery
- Laminated front windshield
- Left side console, tiltable, with lock out for all controls
- Literature holder in right hand cab panel
- Mobile phone holder
- Parking brake
- Positive filtered ventilation, variable speed
- Power supply, 12V-7A
- Rear window, emergency exit
- Retractable seat belt, 51 mm
- Skylight
- Sliding door windows
- Steering column, tiltable
- Storage area suitable for a lunch box
- Sunshade for windshield and skylight
- Travel speed lock
- UNDERCARRIAGE
- Hydrostatic transmission, two speeds
- Creeper speed
- Full hydraulic steering with emergency capability
- Four wheel drive
- Two-piece drive shaft
- Heavy Duty axles, with advanced disc brake system and travel motor with adjustable breaking force
- Oscillating front axle, lockable, with remote greasing point
- Steps, wide, left and right
- Toolbox, left and right
- OTHER EQUIPMENT
- Automatic swing brake
- Counterweight, 4000 kg
- Mirrors, frame and cab
- Cat Product Link
- Capability to add other auxiliary hydraulic circuits
- Caterpillar Datalink and Electronic Technician capability
- Door locks and cab locks with Caterpillar one-key security system
- S∙O∙S quick sampling valves for engine oil, hydraulic oil and coolant
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- AUXILIARY CONTROLS AND LINES
- Auxiliary boom and stick lines
- Basic control circuits: – Medium pressure<ul><li>Two-way, medium pressure circuit, for rotating or tilting of work tools</li></ul>– Tool control/multi function<ul><li>One/two-way high pressure for hammer application or opening and closing of a work tool</li><li>Programmable flow and pressure for up to 10 work tools – selection via monitor</li><li>Quick coupler control</li></ul>
- Pattern changer
- FRONT LINKAGE
- Booms: – One-piece boom, 5350 mm – VA boom (two piece), 5260 mm
- Bucket linkage with diverter valve (Standard for Africa, Middle East and Eurasia)
- Sticks: – 2500, 2800 mm
- HYDRAULICS
- Overload warning device (Standard for Africa, Middle East and Eurasia)
- Boom and stick lowering control devices (Standard for Africa, Middle East and Eurasia)
- ELECTRICAL
- Travel alarm with or without three selectable modes
- Refueling pump
- Lights: – Rotating beacon on cab
- OPERATOR STATION
- Front and top guards
- CD/MP3 Radio (12V) at rear location including speakers and 12V converter
- Windshield: – One piece – 70/30 split, openable, with visor for rain protection
- Seats: – Vertical mechanical suspension with manual weight adjustment and mechanical lumbar support – Vertical air suspension, horizontal suspension, automatic weight adjustment, mechanical lumbar support, passive climate system, seat cushion length and angle adjustment and a seat heater
- Auxiliary high pressure pedal
- UNDERCARRIAGE
- Undercarriages: – Blade front/outriggers rear – Outriggers front/blade rear – Outriggers front and rear (Not available in all markets. Please contact your Cat dealer for details.)
- Tires: – Pneumatic 10.00-20 dual – Solid rubber 10.00-20 dual (Not available in all markets. Please contact your Cat dealer for details.) – Spacer rings for tires – Fenders (Not available in all markets. Please contact your Cat dealer for details.)
- OTHER EQUIPMENT
- Cat Machine Security System (MSS)
- Uppercarriage access steps with integrated tool box
- Cab protecting guards, front and top
Related Products
Units:
Equipment Management
Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.
GC Hammers
Cat ® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.
| Model | Impact Energy Class | ||
|---|---|---|---|
| H120 GC, side mount | — | — | — |
| H120 GC | — | — | — |