914KNon-Current
914K - 2016, Tier 3, Stage IIIA, LRC
Overview
The Cat® 914K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
Specifications
| Maximum Gross Power | — |
| Operating Weight | — |
| Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
Benefits & Features
High Performance
With its high full turn tipping loads and breakout forces, the K Series delivers a powerful solution for all customer applications.
Ease of Operation
State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.
Parallel Lift Loader Linkage
The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
Specifications
| Operating Weight | — |
| Cooling System | — |
| Fuel Tank | — |
| Engine Crankcase | — |
| Hydraulic System - Including Tank | — |
| Axles - Rear Center Differential | — |
| Axles - Front Center Differential | — |
| Transmission | — |
| Hydraulic Tank | — |
| Rated Bucket Capacity | — |
| Maximum Gross Power | — |
| Net Power | — |
| Rated Net Power - Rated Engine Speed | — |
| Maximum Gross Power - ISO 14396 | — |
| Rated Net Power - SAE J1349 | — |
| Maximum Gross Power - SAE J1995 | — |
| Engine Model | Cat C4.4 |
| Maximum Gross Power - ISO 14396 (DIN) | — |
| Maximum Gross Power - Maximum Engine Speed | — |
| Stroke | — |
| Rated Net Power - ISO 9249 (DIN) | — |
| Rated Net Power - ISO 9249 | — |
| Maximum Gross Torque - SAE J1995 | — |
| Emissions | Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards. |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Bore | — |
| Maximum Gross Torque - ISO 14396 | — |
| Displacement | — |
| Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
| Standard Size | 17.5-25 12PR |
| Other Choices Include | 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | — |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | — |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow | — |
| Hydraulic Cycle Time - Dump, at Maximum Reach | — |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | — |
| Hydraulic Cycle Time - Rackback | — |
| Hydraulic Cycle Time - Total Cycle Time | — |
| Relief Pressure - Tilt Cylinder | — |
| Maximum Working Pressure - Implement Pump | — |
| Maximum Flow - Implement Pump | — |
| Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | — |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | — |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | — |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
| Forward and Reverse - Low Range, Speed Range 1* | — |
| Forward and Reverse - Low Range, Speed Range 2* | — |
| Front | Fixed; Locking differential (standard) |
| Rear | Oscillating �11 degrees; Locking differential (Standard) |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | — |
| Steering Articulation Angle - Each Direction | — |
| Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | — |
| Maximum Flow - Steering Pump | — |
| Maximum Working Pressure - Steering Pump | — |
| Maximum Net Torque - SAE J1349 | — |
| Maximum Net Torque - ISO 9249 | — |
Benefits & Features
High Performance
With its high full turn tipping loads and breakout forces, the K Series delivers a powerful solution for all customer applications.
Ease of Operation
State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.
Parallel Lift Loader Linkage
The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
Data not available.
Related Products
General Purpose Buckets - Performance Series
General Purpose Performance buckets provides higher fill factors and material retention in load and carry applications, as well as grading, leveling and dumping in a wide variety of applications and materials.
| Model | Width | ||
|---|---|---|---|
| 1.6 m3 (2.1 yd3), IT Coupler | — | — | — |
| 1.8 m3 (2.4 yd3), Pin On | — | — | — |
| 1.6 m3 (2.1 yd3), ISO Coupler | — | — | — |
| 1.7 m3 (2.2 yd3), Pin On | — | — | — |
| 1.2 m3 (1.6 yd3), ISO Coupler | — | — | — |
| 1.4 m3 (1.8 yd3), ISO Coupler | — | — | — |
| 1.8 m3 (2.4 yd3), IT Coupler | — | — | — |
| 1.2 m3 (1.6 yd3), IT Coupler | — | — | — |
| 1.4 m3 (1.8 yd3), IT Coupler | — | — | — |
| 1.3 m3 (1.7 yd3), Pin On | — | — | — |
| 1.5 m3 (2.0 yd3), Pin On | — | — | — |
| 1.5 m3 (2.0 yd3), IT Coupler | — | — | — |
| 1.8 m3 (2.4 yd3), ISO Coupler | — | — | — |