Overview
Cat® Log & Lumber Fork Carriages are used to load, unload, move deck, sort and feed the mill. Their flat fork tines and raised guards are designed specifically for use in handling both unfinished logs and stacked lumber.
Specifications
| Interface Type | IT Coupler |
| Tine Configuration | Non-swinging, Floating |
| Height | — |
Benefits & Features
Application
Cat® Log & Lumber Fork Carriages are used to load, unload, move deck, sort and feed the mill. Their flat fork tines and raised guards are designed specifically for use in handling both unfinished logs and stacked lumber.
Risers / Log Guards
Risers and Log guards prevent logs from rolling back on to linkages. Maximizes the ability to fill the fork at every pass by supporting large loads.
Wider Carriages
Wider carriages increase stability when handling longer poles/loads.
Specifications
| Interface Type | IT Coupler |
| Tine Configuration | Non-swinging, Floating |
| Height | — |
| Weight | — |
| Width | — |
| Length | — |
| Tine Spacing Range - Outside Width | 1150-1725 mm (45-68 in) |
Benefits & Features
Application
Cat® Log & Lumber Fork Carriages are used to load, unload, move deck, sort and feed the mill. Their flat fork tines and raised guards are designed specifically for use in handling both unfinished logs and stacked lumber.
Risers / Log Guards
Risers and Log guards prevent logs from rolling back on to linkages. Maximizes the ability to fill the fork at every pass by supporting large loads.
Wider Carriages
Wider carriages increase stability when handling longer poles/loads.
Wider Tine Widths
Wider tine widths provide a larger surface area for stability when transporting larger materials.
Floating / Non-floating Tine Configuration
Easily interchange floating and non floating tine configurations by adding/removing a single bolt.
Data not available.
Related Products
Small Wheel Loaders
Cat® Small Wheel Loaders deliver superior performance, fast cycle times and versatility to help you move more material.
| Model | Maximum Gross Power | ||
|---|---|---|---|
| 938M | — | — | 2.5-5.0 m3 (3.2-6.5 yd3) |
| 930M | — | — | 2.1-5.0 m3 (2.7-6.5 yd3) |
| 926M | — | — | 1.9-5.0 m3 (2.5-6.5 yd3) |
| 930M Aggregate Handler | — | — | 2.5-5.0 m3 (3.3-6.5 yd3) |
| 938M Aggregate Handler | — | — | 2.9-5.0 m3 (3.8-6.5 yd3) |
| 926M Aggregate Handler | — | — | 2.5-5.0 m3 (3.3-6.5 yd3) |
| 930M Waste Handler | — | — | 3.0-5.0 m3 (3.9-6.5 yd3) |
| 938M Waste Handler | — | — | 3.0-5.0 m3 (3.9-6.5 yd3) |
| 930M Ag Handler | — | — | 2.1-5.0 m³ (2.7-6.5 yd³) |