Overview
Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.
Specifications
| Machine Class | 7-9 Ton Mini Excavators |
| Weight | — |
| Interface Options: Top-Bottom | Pin-On / S-50 |
Benefits & Features
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS8 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Specifications
| Machine Class | 7-9 Ton Mini Excavators |
| Weight | — |
| Interface Options: Top-Bottom | Pin-On / S-50 |
| Overall Height | — |
| Length | — |
| Overall Width | — |
| Rotation Speed | 7 seconds per 1 full rotation |
| Tilt Angle Range +/- | 40 degrees left/right |
| Maximum Bucket Capacity | — |
| Maximum Bucket Width | — |
| Optimal Hydraulic Flow | 45-75 L/min (12-20 gpm) |
| Maximum Operating Pressure | — |
| Required Hydraulics | 1st Auxiliary |
| Tilting Torque | — |
| Turning Torque | — |
Benefits & Features
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS8 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinders with Load Hold Valves
Valves sustain holding pressures and prevent cylinders movement under load constraints required by directives.
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Compatibility Note
- Only compatible with the following Next Gen machines and serial numbers:
- 307.5 - S/N GW7 1 & Up
- 308 - S/N GG8 1 & Up
- 308 - S/N GW8 1 & Up
- 308.5 - S/N GZ8 1 & Up
- 309 - S/N GG9 1 & Up
- 309 - S/N GW9 1 & Up
- 310 - S/N GWT 1 & Up
Data not available.
Related Products
Mini Excavators
An extensive line of Cat® mini hydraulic excavators from 1-10 metric tons offers the performance to dig in and be productive on every job.
| Model | Net Power | ||
|---|---|---|---|
| 308 CR VAB | — | — | — |
| 309 CR VAB (Long Undercarriage) | — | — | — |
| 307.5 | — | — | — |
| 308 CR | — | — | — |
| 309 CR | — | — | — |