Overview
Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.
1104D-44TG ELECTROPAK ENGINE 4.4 litre60-71 kVADesigned to meet U.S. EPA Tier 3 emission standards
Specifications
| Gross Mechanical Output | 56-69 kWm |
| Typical Electrical Output | 60-73 kVA (48-58 kWe) |
| Emissions | EU Stage IIIA/U.S. EPA Tier 3 |
Benefits & Features
Reliable operation
With low fuel and oil consumption, and 500 hour service intervals, your 1104 range engine will run and run.
Simple installation
Common front and rear ends, connection points and components across the range mean that you can easily install a different 1100 Series engine in your application.
Specifications
| Gross Mechanical Output | 56-69 kWm |
| Typical Electrical Output | 60-73 kVA (48-58 kWe) |
| Rated Speed | 1500/1800 rpm |
| Prime | 60.0 kVA |
| Standby | 66.0 kVA |
| Prime | 52.0 kWe |
| Standby | 56.7-58.0 kWe |
| Emissions | EU Stage IIIA/U.S. EPA Tier 3 |
| Number of Cylinders | 4 inline |
| Bore | — |
| Stroke | — |
| Displacement | — |
| Compression Ratio | 18.2:1-19.3:1 |
| Aspiration | Turbocharged |
| Combustion System | Direct injection |
| Rotation from Flywheel End | Anti-clockwise |
| Cooling System | Liquid |
| Aftertreatment | - |
| Typical Alternator Efficiency | 90% |
| Switchable | Yes |
| Length | — |
| Width | — |
| Height | — |
| Dry Weight | — |
| Note 1 | *Final dimensions dependent on selected options |
| Note 2 | ESE (1800 rpm) only - Emergency Stationary Equipment |
| Prime Power | Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. |
| Standby Power | Power available at variable load in the event of a main power network failure. No overload is permitted. |
Benefits & Features
Reliable operation
With low fuel and oil consumption, and 500 hour service intervals, your 1104 range engine will run and run.
Simple installation
Common front and rear ends, connection points and components across the range mean that you can easily install a different 1100 Series engine in your application.
Data not available.
Standard Equipment
- Air inlet system
- Mounted air filter and turbocharger
- Control system
- 12 volt starter motor and 12 volt 65 amp alternator with DC output
- Cooling system
- Belt driven pusher fan and guards
- Mounted radiator and piping
- Water pump
- Flywheels and flywheel housing
- High inertia flywheel to SAE J620 size 10/11
- SAE No. 3 flywheel housing
- Fuel system
- Fuel filter
- Rotary type pump
- General
- Glow plug start aid
- Oil system
- Oil filter
- Wet cast iron sump with filler and dipstick