/  Power Systems  /  Electric Power  /  ATS MX Contactor

CTE Series Automatic Transfer SwitchNon-Current

CTE Series Automatic Transfer Switch

Overview


The Cat® CTE Series transfer switches are configurable for applications requiring the dependability and ease of operation found in a full featured power contactor type transfer switch.

The CTE Series is equipped with the MX350 controller that is designed for the most demanding transfer or bypass switch applications providing enhanced connectivity for accurate and timely diagnostics and event recording.

Specifications

Units: 
Rating Range 40-4000A
Transfer Type Open / Closed / 4 position switch
Switch Type Contactor Based
See more

Benefits & Features

Design and Construction Features

    • Double throw, interlocked operation
    • Electrically operated, mechanically held by a simple, over-center mechanism
    • Silver alloy contacts with separate arcing contacts on 600 amp and above
    • Arc quenching grids, enclosed arc chambers, and wide contact air gap for superior source to-source isolation on all units
    • Durable solenoid ATS operated mechanisms and robust electronics, tested for severe Electro Magnetic Compatibility and Environmental conditions
    • Control circuit disconnect plug and drive inhibit switch for safe maintenance
    • Components accessible for inspection and maintenance without removal of the switch or the power conductors
    • Mechanical indicator and contact chamber cover designed for inspection, safety and position designation

Performance Features

    • Standard open two position transition plus delayed and closed transition
    • High close-in and withstand capability
    • Temperature rise test per UL 1008 conducted after overload and endurance tests in unventilated enclosure – exceeds UL requirements
    • Equipped with the MX350 Control Packag

  October 31, 2024

Specifications

Units: 
Technical Summary
Rating Range 40-4000A
Transfer Type Open / Closed / 4 position switch
Switch Type Contactor Based
Electrical Ratings
Control Power 40 to 4000 amperes, 2,3 or 4 poles
Enclosure Capability NEMA 1, 3R, 4, 4X and 12
System Voltage Application Available to 600 VAC, 50 or 60 Hz
Applicable Testing <li>Seismic tested and certified to IBC 2006 & OSHPD</li> <li>CSA C22.2 No. 178 certified at 600 VAC</li> <li>IEC 947-6-1 liste

Benefits & Features

Design and Construction Features

    • Double throw, interlocked operation
    • Electrically operated, mechanically held by a simple, over-center mechanism
    • Silver alloy contacts with separate arcing contacts on 600 amp and above
    • Arc quenching grids, enclosed arc chambers, and wide contact air gap for superior source to-source isolation on all units
    • Durable solenoid ATS operated mechanisms and robust electronics, tested for severe Electro Magnetic Compatibility and Environmental conditions
    • Control circuit disconnect plug and drive inhibit switch for safe maintenance
    • Components accessible for inspection and maintenance without removal of the switch or the power conductors
    • Mechanical indicator and contact chamber cover designed for inspection, safety and position designation

Performance Features

    • Standard open two position transition plus delayed and closed transition
    • High close-in and withstand capability
    • Temperature rise test per UL 1008 conducted after overload and endurance tests in unventilated enclosure – exceeds UL requirements
    • Equipped with the MX350 Control Packag

Standard Equipment

  • The CTE Series of Automatic Tranfser Switches
    • Drive Mechanism
    • Bypass Isolation Switches CBTED & CBTECT
    • The Cat CTE Series power contactor type transfer switch makes use of a fully programmable/configurable microprocessor-based controller to allow the utmost in application flexibility. Further, the CTE Series is offered in a wide array of configurations enabling it to meet the needs of even the most highly critical load.<br>Available configurations include:
    • <ul>The MX350 microcontroller is a modular control and monitoring system designed specifically for low voltage transfer switch applications.<br> The MX350 provides the following key benefits:<br>Flexible control and communication options to suit any low-voltage transfer switch application <br>Small footprint<br>Modular design, which reduces the number of spare components for maintenance and testing</ul>
    • <ul>40-4000 Amps: <br><li>CTE Automatic Transfer Switches</li><li>CTED Delayed Transition Transfer Switches</li><li>CTEM Manual Transfer Switches</li><br>100-4000 Amps:<br><li>CTECT Closed Transition Transfer Switches</li><li> CBTE Open Transition Bypass Switches</li><li>CBTED Delayed Transition Bypass Switches</li><li>CBTECT Closed Transition Bypass Switches</li> </ul>
    • CTECT Series:
    • Neutral Switching
    • CTE Electrical Ratings
    • Safe Manual operation
    • CTED Series:

View 360