Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.
Maximum Rating | — |
Emissions | NSPS Site Compliant Capable or Non-regulated |
Displacement | — |
• Improved reliability and durability • Ability to burn a wide spectrum of gaseous fuels • Robust diesel strength design prolongs life and lowers owning and operating costs• Broad operating speed range
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/08
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Leanburn design also provides longer component life and excellent fuel consumption.
Maximum Rating | — |
Emissions | NSPS Site Compliant Capable or Non-regulated |
Displacement | — |
Minimum Rating | — |
Compression Ratio | 8.5:1 |
Aspiration | Turbocharged-Aftercooled |
Rotation from Flywheel End | Counterclockwise |
Flywheel and Flywheel Housing | SAE No. 0 |
Flywheel Teeth | 136 |
Weight - Dry | — |
Oil Change Interval | 750 hours |
Ignition, Protection | Cat EIS |
Stroke | — |
Bore | — |
Cooling System | — |
Lube Oil System - Refill | — |
• Improved reliability and durability • Ability to burn a wide spectrum of gaseous fuels • Robust diesel strength design prolongs life and lowers owning and operating costs• Broad operating speed range
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/08
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Leanburn design also provides longer component life and excellent fuel consumption.
Detonation sensitive timing protects the engine against detonation damage. Higher voltage and longer spark duration mean easier starts, fewer misfires, and smoother operation. Diagnostic codes help pinpoint cylinder and component of interest. Spark plug maintenance codes identify spark plug condition
• Deep sump oil pan has a larger capacity for normal 750-hour oil change intervals• Side covers on block allow for inspection of internal components
Large variety of factory-installed engine attachments reduces packaging time
Every engine is full-load tested to ensure proper engine performance.
GERP is a web-based program designed to provide site performance capabilities for Cat natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outletsCaterpillar factory-trained dealer technicians service every aspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repair-before-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 60 years of natural gas engine productionOwnership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine
For all your petroleum power requirements, visit www.cat.com/oilandgas.
Data not available.