C280-16

C280-16

Overview

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Specifications

Units: 
Maximum Rating 4840 ekW (60Hz), 6500 kVA (50Hz)
Minimum Rating 4400 ekW (60Hz), 5875 kVA (50Hz)
Emissions/Fuel Strategy EPA Tier 4 Final, IMO Tier 2
See more

Benefits & Features

Cat Diesel Engine

Generator

Worldwide Product Support

  September 13, 2024

Specifications

Units: 
Generator Set Specifications
Maximum Rating 4840 ekW (60Hz), 6500 kVA (50Hz)
Minimum Rating 4400 ekW (60Hz), 5875 kVA (50Hz)
Emissions/Fuel Strategy EPA Tier 4 Final, IMO Tier 2
Frequency 50 / 60 Hz
Speed 900 / 1000 rpm
Duty Cycle Prime, Continuous
Engine Specifications
Engine Model C280-16, V-16,4-Stroke Water-Cooled Diesel
Bore
Stroke
Displacement
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
Width - Maximum
Height - Maximum
Dry Weight - Genset (maximum)

Benefits & Features

Cat Diesel Engine

Cat Diesel Engine

    • Reliable, rugged, durable design
    • Field-proven in thousands of applications worldwide
    • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

Generator

Generator

    • Matched to the performance and output characteristics of Cat engines
    • Industry leading mechanical and electrical design
    • Industry leading motor starting capabilities
    • High Efficiency

Worldwide Product Support

Worldwide Product Support

    • Cat dealers provide extensive post-sale support including maintenance and repair agreements.
    • Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S��?�O��?�S��?��?��? program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

Full Range of Attachments

Full Range of Attachments

    • Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation

Standard Equipment

  • Air Inlet System <!-- 3600 series only -->
    • Air inlet shutoff
    • Turbocharger, watercooled, engine oil lubricated
    • Breather, crankcase, top-mounted
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air cleaner
  • Cooling System
    • Three-bundle oil cooler
    • Jacket water thermostats
    • Front Mounted turbos
    • Engine coolant water drains
    • Water temperature regulator
  • Exhaust System
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Centrifugal oil filters with single shutoff
    • Oil filler and dipstick
    • Service Side Engine mounted on Cylinder Block Inspection Covers
    • Crankcase explosion relief valves
    • Oil pressure regulating valve
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • Line group for single point custom connection
    • Two Motors, engine mounted at rear, on left side
    • Vane type air starter
    • Air silencer
  • General:
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
    • Paint, Caterpillar yellow

Optional Equipment

  • Air Inlet System
    • Air inlet adapter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
  • Cooling System
    • Auxiliary water pump
    • Heat exchanger for single circuit
    • Expansion tank
    • Cooling system aids
    • Heating aids
  • Exhaust System
    • Flexible exhaust Fittings
    • Weld flange and related hardware
  • Fuel System
    • Duplex primary fuel strainer
    • Fuel system connections
    • Fuel priming pump
  • Generator System
    • Winding temperature detectors
    • Anti-condensation space heaters
    • 3 Phase, Six Leads, WYE
    • Class F insulation
    • Busbar connections
  • Governor System
    • Electronic/actuators
    • EGB actuator
    • Digital programmers
    • Battery backup/power supply
    • 230 UA
    • 723 Plus
  • Lube System
    • Oil pan drain valve
    • Lube ANSI Adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolators
    • Vertically Restrained
    • Non-vertically Restrained
    • Isolator
  • Starting / Charging System
    • Compressed air flex hose
    • Turbine type air starters
    • Pressure reducing valve
    • Redundant air starters
  • General:
    • Custom paint colors

View 360