Energy Time Shift (ETS) ModuleNon-Current

Energy Time Shift (ETS) 20' Module

Overview

The Cat® Energy Time Shift (ETS) module is a scalable, rapidly deployable energy storage system. The energy storage system integrates with the utility, generator sets and renewable sources to store energy for use at a later time. The system may provide temporary backup power to facilities in the event of a power outage.

Specifications

Units: 
Application Peak Shaving
Module Type Energy Time Shift
Nameplate Power 570 kW | 1000 kW
See more

Benefits & Features

Reliable and Scalable

    Factory prepackaged and tested
    • Pre-engineered containers shipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
    • Parallel ready - Multiple energy storage modules may be operated in parallel to provide increased power output and/or increase the battery kWh capacity from 30 minutes to nine (9) hours of capacity per energy storage system.

Renewable Integration

    • Designed to work with an array of renewable systems, including solar and wind
    • Integration with the Cat Microgrid Master Controller (MMC) allows for time-shifting of renewable energy for increased renewable content and full asset control allows smoothing of intermittent renewables.
    • The grid forming Cat Bi-Directional Power (BDP) inverter allows generator set(s) to be completely switched off, further reducing fuel consumption and operating costs.

Transient Assist

    When used with a generator set, the Energy Storage System will provide reserve power capacity to:
    • Decrease the transient voltage and frequency dips resulting from the application of large loads.
    • Enables highly-efficient lean-burn gas gensets to operate in island mode.
    • And enables the shutdown of one or more gensets for fuel savings.

  October 31, 2024

Specifications

Units: 
Technical Summary
Application Peak Shaving
Module Type Energy Time Shift
Nameplate Power 570 kW | 1000 kW
Nameplate Energy Capacity 1518 kWh

Benefits & Features

Reliable and Scalable

    Factory prepackaged and tested
    • Pre-engineered containers shipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
    • Parallel ready - Multiple energy storage modules may be operated in parallel to provide increased power output and/or increase the battery kWh capacity from 30 minutes to nine (9) hours of capacity per energy storage system.

Renewable Integration

    • Designed to work with an array of renewable systems, including solar and wind
    • Integration with the Cat Microgrid Master Controller (MMC) allows for time-shifting of renewable energy for increased renewable content and full asset control allows smoothing of intermittent renewables.
    • The grid forming Cat Bi-Directional Power (BDP) inverter allows generator set(s) to be completely switched off, further reducing fuel consumption and operating costs.

Transient Assist

    When used with a generator set, the Energy Storage System will provide reserve power capacity to:
    • Decrease the transient voltage and frequency dips resulting from the application of large loads.
    • Enables highly-efficient lean-burn gas gensets to operate in island mode.
    • And enables the shutdown of one or more gensets for fuel savings.

Grid Stabilization

    • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

High Performance Inverter

    • Built-in controls for the charging and discharging of the energy storage equipment.
    • Static VAR compensator.
    • Four-quadrant output power factor control.
    • Aautomatic anti-islanding to meet UL 1741 and synchronization back to grid.

Applicable Standards and Certifications

    UL Listed to the following standards (certification and mark pending):
    • UL 9540
    • UL 1741 SB
    • CSA C22.2 No. 107.1/16
    • cULus mark
    Declarations (pending):
    • CE Declaration of conformity
    • IEC60204-1

Standard Equipment

  • Energy Time Shift
    • Cat BDP bi-directional power inverter
    • Energy storage batteries
    • Color HMI touchscreen
    • Remote communications via Modbus TCP
    • HVAC system to maintain interior temperature
    • Liquid / Air cooling
    • Isolation Transformer
    • Convenience receptacles
    • Fire suppression system

View 360