C32 Tier 3 / IMO II

C32 Tier 3-IMO II

Overview

Cat C32 Auxiliary / Diesel Electric Propulsion (US EPA Tier 3 / IMO II)

Specifications

Units: 
Minimum Rating
Maximum Rating
Aspiration Turbocharged-aftercooled aspiration
See more

Benefits & Features

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and the A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

  November 26, 2024

Specifications

Units: 
Power Rating
Minimum Rating
Maximum Rating
Engine Specifications
Aspiration Turbocharged-aftercooled aspiration
Emissions U.S. EPA Tier 3 / IMO II emissions certified
Displacement
Bore
Stroke
Rotation Counterclockwise from flywheel end
Configuration Vee 12, 4-stroke-cycle diesel
Oil Change Interval 750 hrs
Flywheel Housing SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Refill Capacity Lube Oil System w/Oil filter change: 146 L (38.5 gal)
Governor Electronic (A4 ECM)
Rated Engine Speed 1800 rpm
Cooling Heat exchanger or keel cooled
Dimensions & Weights
Minimum Length
Maximum Width
Minimum Engine Dry Weight
Minimum Width
Minimum Height
Maximum Length
Maximum Engine Dry Weight
Maximum Height

Benefits & Features

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and the A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • MOUNTING SYSTEM
    • Adjustable front support mounting system
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment

  • AIR INLET SYSTEM
    • Closed crankcase fumes disposal
  • ALARM AND PROTECTION
    • MECP I control panel
    • MGCP II or MGCP IIIB control panel with Cat® Alarm and Protection System
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Primary fuel filter with water separator, fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • POWER TAKE-OFFS
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • STARTING SYSTEM
    • Starting motors – air, electric or dual

View 360