C32 Tier 3 / IMO II

C32 Tier 3-IMO II

Overview

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Specifications

Units: 
Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz
See more

Benefits & Features

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

  November 23, 2024

Specifications

Units: 
Generator Set Specifications
Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz
Engine Specifications
Configuration Vee-12, 4-stroke-Cycle-Diesel
Aspiration Turbocharged-aftercooled aspiration
Bore
Stroke
Displacement
Emissions U.S. EPA Tier 3 / IMO II emissions certified
Rated Engine Speed 1800 rpm
Governor Electronic (A4 ECM)
Generator SR5 - Form Wound
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Cooling Heat exchanger, keel or radiator cooled
Oil Change Interval 750 hrs
Generator Set Dimensions
Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Benefits & Features

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger, keel or radiator cooled
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • GENERATORS AND GENERATOR ATTACHMENTS
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
  • MOUNTING SYSTEM
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment

  • AIR INLET SYSTEM
    • Closed crankcase ventilation
  • ALARM AND PROTECTION
    • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
    • IP44 generator protection
  • EXHAUST SYSTEM
    • Muffler
    • SOLAS approved spray shielding
  • CHARGING SYSTEM
    • Charging alternator
  • CONTROL SYSTEM
    • EMCP 4.2 control panel
  • FUEL SYSTEM
    • Installed primary fuel filter with water separator and manual or electric priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • STARTING SYSTEM
    • Starting motors – air, electric or dual

View 360