Overview
The key attributes of the VM 46 DF are class leading efficiency and loading capacity as well as operational simplicity, which is supported by a fully automated engine control. Fast service access as well as service and maintenance simplicity are supported by a modular engine design concept and the monitoring and diagnostic system.
Specifications
Units:
| Minimum Rating | 10357 kWe (12960 kVA) |
| Maximum Rating | 14807 kWe (18528 kVA) |
| Configuration | 12,16 Cylinder |
Benefits & Features
Specifications
Units:
| Minimum Rating | 10357 kWe (12960 kVA) |
| Maximum Rating | 14807 kWe (18528 kVA) |
| Emissions/Fuel Strategy | IMO II in diesel mode / IMO III in gas mode |
| Configuration | 12,16 Cylinder |
| Bore | — |
| Stroke | — |
| Swept Volume | — |
| Length | 14740 - 16870 mm (580.3 - 664.2 in) |
| Height | 6493 - 6517 mm (255.6 - 256.6 in) |
| Width | 3890 - 4027 mm (153.1 - 158.5 in) |
| Weight | 275.0 - 345.0 t (606271 - 760595 lbs) |
Benefits & Features
Ease of installation
Reliable Operation
Ease of maintenance
Easy component accessibility
Data not available.
Standard Equipment
- Air Inlet System
- Air intake silencer / filter
- Control System
- Load sharing unit
- Modular Alarm Control Protection System (MACS)
- Speed governor
- Cooling System
- Electric cooling water preheater
- HT cooling water pump (engine driven)
- 2-stage charge air cooler
- Exhaust System
- Exhaust gas expansion joint
- Exhaust gas insulated manifolds
- Turbocharger at flywheel end / counter-flywheel end
- Fuel System
- Fuel circulating pump (electric driven / for MDO/MGO only)
- Fuel indicator filter
- Fuel pressure valve (separate / for MDO/MGO only)
- Gas System
- Gas valve unit
- Instrumentation
- Control push buttons and lamps
- Emergency stop lever
- Local control panel
- Pressure and temperature indicator
- Lube System
- Dry sump
- Lube oil plate cooler (separate)
- Lube oil pump (engine driven)
- Lube oil safety filter
- Lube oil self-cleaning filter
- Pressure regulating valve
- Mounting System
- High flexible coupling
- Rigid mounting
- Starting System
- Electrical barring device
- Starting air valve
- General
- Torsional Vibration Calculation (TVC)
Optional Equipment
- Air Inlet System
- Air inlet shut-off valve
- Air intake transition piece
- Expansion joint
- Silencer / filter
- Control System
- Engine alarm system
- Remote control system
- Remote indicators (start air pressure, engine speed, etc.)
- Starter for electric driven pumps
- 24 DC UPS
- Cooling System
- Cooling water piping for generator cooling on base frame
- Cooling water piping for lubricating oil cooler on base frame
- Cooling water preheater steam / thermal oil / electrical
- FW/SW plate cooler
- HT cooling water pump (electric driven)
- LT cooling water pump (electric driven)
- Sea water cooling pump (electric driven)
- Temperature contol valve
- Exhaust System
- Exhaust gas ventilation module
- Silencer (with or withour spark arrester)
- Fuel System
- Fuel oil cooler
- HFO final preheater
- HFO pressure regulating valve
- HFO self-cleaning automatic filter
- HFO supply and booster pumps (electrical driven)
- HFO treatment and supply modules
- HFO viscosity control device
- Mixing tank
- Gas System
- Gas flowmeter
- LNG vaporizing system
- Lube System
- Lube oil centrifuge
- Lube oil pump (electrical driven)
- Lube oil treatment and combined modules
- Pre-lubricating oil pump (electrical driven)
- Temperature control valve
- Wet sump with dip stick
- Mounting System
- Double resilient mounting
- Flexible pipe connections
- Resilient mounting
- Propulsion System
- Control system
- Thrusters
- Starting System
- Starting air compressor
- Starting air receiver
- General
- Engine PTO coupling
- Flywheel cover
- PTO alternator
- PTO shaft on counter-flywheel end
- Reduction gear
- Reduction gear PTO coupling