Overview
The Cat® C1.1 Industrial Diesel Engine is offered in ratings ranging from 14.4-18.4 bkW (19.3-24.7 bhp) @ 1800-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Underground Mining Equipment.
Specifications
| Maximum Power | — |
| Maximum Torque | — |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V |
Benefits & Features
Reliable power
Manufactured in some of the world's most modern and highly-automated production facilities, the Cat® C1.1 is proven to deliver durable power and offers a wide range of customization options that refuse to compromise quality and durablity.
Compact size
With a 18.4 kW (24 hp) power rating, the C1.1 and the C1.1 turbo allows OEMs to consider different installation, operating and commercial requirements. These models are particularly adapted to machines where power from a small
package is crucial. And for jobs that require that extra bit of power, there's a turbocharged option that delivers in almost any condition, at any altitude.
Quiet work
The stiff block and indirect injection system in the C1.1 were built for quiet so worksites are safer, operators are less
fatigued and noise levels in regulated areas aren't exceeded.
Specifications
| Maximum Power | — |
| Maximum Torque | — |
| Rated Speed | 2800 rpm |
| Minimum Power | — |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V |
| Engine Configuration | In-Line 3 |
| Bore | — |
| Stroke | — |
| Displacement | — |
| Compression Ratio | 23.0:1 |
| Aspiration | Naturally Aspirated (NA)/Turbocharged (T) |
| Combustion System | Indirect Injection |
| Rotation from Flywheel End | Counterclockwise |
| Aftertreatment | - |
| Length | — |
| Width | — |
| Height | — |
| Weight - Net Dry - Basic Operating Engine Without Optional Attachments | — |
Benefits & Features
Reliable power
Manufactured in some of the world's most modern and highly-automated production facilities, the Cat® C1.1 is proven to deliver durable power and offers a wide range of customization options that refuse to compromise quality and durablity.
Compact size
With a 18.4 kW (24 hp) power rating, the C1.1 and the C1.1 turbo allows OEMs to consider different installation, operating and commercial requirements. These models are particularly adapted to machines where power from a small
package is crucial. And for jobs that require that extra bit of power, there's a turbocharged option that delivers in almost any condition, at any altitude.
Quiet work
The stiff block and indirect injection system in the C1.1 were built for quiet so worksites are safer, operators are less
fatigued and noise levels in regulated areas aren't exceeded.
Data not available.
Standard Equipment
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
- Power Take Off (PTO)
- Provision for Power Take Off (PTO)
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request