WIP EMCP 4.22024-02-25T16:28:56-06:00EMCP 4.2 Control PanelEMCP 4.2 Generator Set ControllerCaterpillarNoncurrentControlAuto / Start / Stop controlRemote start / stopSpeed and voltage adjustEngine Cooldown TimerLocal and remote emergency stopEngine Cycle CrankProgrammable Cycle TimerDisplayA 33 x 132 pixel, 3.8 inch, graphical display denotes text alarm/event descriptions, set points, engine and generator monitoring and is visible in all lighting conditionsGenerator MonitoringVoltage (L-L, L-N)Current (Phase)Average Volt, Amp, FrequencykW, kVAr, kVA (Average, Phase, %)Power Factor (Average, Phase)kW-hr, kVAr-hr (total)Generator ProtectionOver/Under voltage (27/59)Over/Under frequency (81/OU)Generator phase sequenceOvercurrent (50/51)Reverse Power (kW)(32)Reverse Reactive Power (kVAr) (32RV)Engine MonitoringEngine speed (RPM)Battery voltageOil pressureOil TemperatureCoolant temperatureMultiple Language SupportCrank attempt and successful start counterRun hoursEnhanced engine monitoring (with electronic engines)Engine ProtectionLow engine oil pressure (alarm)High engine oil temp (alarm and shutdown)High coolant temp (alarm and shutdown)Low coolant temp (alarm)Low coolant level (alarm)OvercrankOverspeedControl switch not in auto (alarm)Low, high, and weak battery voltageCommunicationsPrimary and accessory CAN data linksRS-485 annunciator data linkModbus RTU (RS-485 Half duplex)Inputs & OutputsSix programmable form A dry contactsTwo programmable form C dry contactsTwo digital outputsTwo dedicated analog inputsOne programmable analog inputTwo dedicated digital inputsSix programmable digital inputsLanguage SupportArabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Icelandic, Italian, Latvian, Lithuanian, Japanese, Norwgian, Polish, Portguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish & TurkishEnvironmentalControl module operating temperature: -40°C to 70°CDisplay operating temperature: -20°C to 70°CHumidity: 100% condensing 30°C to 60°CStorage temperature: -40°C to 85°CVibration: Random profile, 24-1000 Hz, 4.3G msGenerator MonitoringExcitation voltage and current (with CDVR)Generator stator and bearing temp (with optional module)CAN AnnunciatorThe EMCP 4 CAN Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the accessory communication network and may be used in either local (package mounted) or remote (up to 800 feet) application.A maximum of three annunciators may be used with a single EMCP 4.2RS-485 AnnunciatorThe EMCP 4 RS-485 Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the long distance annunciator datalink and is used for remote (up to 4000 feet) application.Remote Monitoring SoftwareThe EMCP 4 remote monitoring software package is a PC based program which allows the user tomonitor and control a generator set, and is capable of running on a Windows based operating system.The remote monitoring software allows the user to configure data monitoring and data acquisitionprocesses for monitoring, graphing, and logging of genset data.Digital Input/Output ModuleThe Digital Input/Output (DI/O) module serves to provide expandable Input and Output capability of the EMCP 4 and is capable of reading 12 digitalinputs and setting 8 relay outputs. The DI/Omodule has been designed for use on the accessoryCommunication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.A maximum of four DI/O modules may be used with a single EMCP 4.2.RTD ModuleThe RTD module serves to provide expandable generator temperature monitoring capability of the EMCP 4 and is capable of reading up to eight type 2-wire, 3-wire and 4-wire RTD inputs. The RTD Module has been designed for use on the Accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.A maximum of one RTD Module may be used with a single EMCP 4.2.Thermocouple ModuleThe thermocouple module serves to provide expandable engine and generator temperature monitoring capability of the EMCP 4 and iscapable of reading up to twenty Type J or K thermocouple inputs. The thermocouple module has been designed for use on the accessory communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.A maximum of one thermocouple module may be used with a single EMCP 4.2 on each datalink.1000001184product182609324021000001187product182609324021000001190product182609324021000001191product182609324021000001234product182609324021000001235product182609324021000027407product182609324021000027408product182609324021000027409product182609324021000027410product182609324021000027411product182609324021000027412product182609324021000028900product182609324021000028901product182609324021000028902product182609324021000028903product182609324021000028984product182609324021000028985product182609324021000028990product182609324021000028991product182609324021000029403product182609324021000029523product182609324021000029524product1826093240215970391product1826093240218331028product1826093240218331146product1826093240218331379product1826093240218488263product1826093240218488397product1826093240218489720product1826093240218595256product1826093240215969820product1832728440215969821product1832728440215969822product1832728440215969823product1832728440215970066product1832728440218487648product1832728440218487651product1832728440218487654product1832728440218452757product1843470740218452886product18434707402OverviewEMCP 4 ControlsThe EMCP 4 includes the following controls: <ul> <li>Auto / Start / Stop Control</li> <li>Speed and Voltage Adjust</li> <li>Engine Cycle Crank</li> <li>Programmable Cycle Timer</li> <li>24-volt DC operation</li> <li>Environmental sealed front face </li> <li>Text alarm/event descriptions</li> </ul>Digital Indicators<ul> <li>RPM</li> <li>DC volts</li> <li>Operating hours</li> <li>Oil pressure (psi, kPa or bar)</li> <li>Coolant temperature</li> <li>Volts (L-L & L-N), frequency (Hz) </li> <li>Amps (per phase & average)</li> <li>ekW, kVA, kVAR, kW-hr, %kW, PF</li> </ul>Warning / Shutdown IndicatorsThe EMCP 4 has common LED indicators of the following warning and shutdown conditions <ul> <li>Low oil pressure</li> <li>High coolant temperature</li> <li>Overspeed</li> <li>Emergency stop</li> <li>Failure to start (overcrank) </li> <li>Low coolant temperature </li> <li>Low coolant level</li> </ul>Programmable Protective Relaying<ul> <li>Generator phase sequence</li> <li>Over/Under voltage (27/59)</li> <li>Over/Under Frequency (81 o/u)</li><li>Reverse power (kW) (32) <li>Reverse reactive power (kVAr) (32RV) </li> <li>Overcurrent (50/51)</li> </ul>Communications<ul><li>Six digital inputs</li> <li>Emergency stop pushbutton</li> <li>Six relay outputs (Form A)</li> <li>Two relay outputs (Form C)</li> <li>Two digital outputs</li> <li>One Analog Input</li> <li>customer data link (Modbus RTU)</li> <li>Accessory module data link</li> <li>Serial annunciator module data link</li> </ul>CompatibilityThe EMCP 4 is compatible with: <ul> <li>Remote CAN annunciator</li> <li>Remote serial annunciator</li> <li>Local Annunciator</li> <li>Remote Monitoring Software</li> <li>Digital I/O module</li> <li>RTD module</li> <li>Thermocouple module</li> </ul>EMCP 4.2 Control PanelThe EMCP 4 Control Panel provides all of the controls and system indicators in one easy to access interface.The Cat<sup>®</sup> EMCP 4 Control Panel provides all of the controls and system indicators in one easy to access interface.Electric Power2024-02-25T16:28:56-06:00